User manual

CHAPTER 5 FEATURE DESCRIPTION
Page 130 NEAX 2000 IPS General Description
NDA-24345, Issue 3
Handsfree Unit
The built-in Handsfree Unit enables full Handsfree operation for both internal and external calls
(No optional Handsfree Unit is required).
I-Hold / I-Use Indication
Multiline Terminals provide indication of which line keys have been placed on Hold, or are in
use by that Multiline Terminal. The LED associated with the line key will give the appropriate
indication.
Microphone Control
All Multiline Terminals are equipped with a Microphone Control button with an associated
LED.
Multiple Line Operation
This feature allows for the appearance of multiple lines on the Flexible Line Keys and feature
keys of all Multiline Terminals.
Mute Key
This feature allows the distant extension user, of a station user that presses a mute key during
conversation, not to hear the station user's voice though the station user can hear the distant
extension user's voice. By pressing the mute key again, the mute status returns to original
conversation.
Prime Line Pickup
This feature allows a Multiline Terminal user to go off hook and originate a call from the line
assigned as the Prime Line without depressing the associated line key.
Recall Key
Each Multiline Terminal is equipped with a Recall Key that is used to generate a hookflash to
access features provided by the outside exchange, or to abandon a call while retaining the line
for origination of another call.
Relay Control Function Key
This feature provides a Multiline Terminal with the ability to activate/deactivate relays (on a
PN-DK00) to control external devices.
Ring Frequency Control
The ring frequency of the Multiline Terminal can be controlled on a station basis in system
programming (four frequencies are available) or by use of a function key on the Multiline
Terminal.
Ringing Line Pickup
This feature provides the ability to answer any call ringing into a Multiline Terminal by just
lifting the handset.