User manual

CHAPTER 5 FEATURE DESCRIPTION
NEAX 2000 IPS General Description Page 129
NDA-24345, Issue 3
Privacy
This feature restricts Multiline Terminal users from depressing a busy line button and entering a
conversation unless permitted by the Multiline Terminal user currently on that line button or if the
line button is assigned for Direct Privacy Release.
Direct Privacy Release
This feature allows a station user with a secondary appearance of another extension in the
system to access that extension when it is being used by someone else. This feature allows for a
simplified method for establishing a conference. In addition, this feature can be used to emulate
PC dialing, where a single line extension connected to a PC can appear on a Multiline Terminal
and be accessed by the Multiline Terminal user after the PC is completed dialing.
Manual Privacy Release
This feature allows a Multiline Terminal user to enter a conversation on a busy line button if the
Multiline Terminal user already in the conversation allows them by releasing Privacy.
Private Lines
Only a C.O. trunk assigned to that specific station is seized when a station user originates an
outgoing C.O. call or when an incoming C.O. call is terminated at the station designated by Direct-
In-Termination. In this manner, stations and C.O. trunks are to be associated on a 1-to-1 basis.
Property Management System Interface
The NEAX2000 IPS provides a data interface to a locally provided Property Management System
(PMS). This enables communication between the NEAX2000 IPS and the PMS in order to provide
computer control of Hotel/ Motel features.
Proprietary Multiline Terminal
There are five Multiline Terminals that can be used with the system.
• Dterm Series i
• Dterm Series E
• IPK/Electra Elite
Automatic Idle Return
This feature returns a station to the idle state after 3 seconds of reorder tone is received due to
the distant end disconnecting.
Called Station Status Display
This feature provides a display on the status of a called station on the LCD of the calling
Multiline Terminal.
Calling Name and Number Display
This feature provides a display on the LCD of the Multiline Terminal receiving a call, indicating
the station number or trunk number of the incoming call.
Dynamic Dial Pad
This feature allows to make an outgoing call at first hand by pressing a ten key of Multiline
Terminal, without pressing a Speaker key or going off-hook.