User manual

CHAPTER 5 FEATURE DESCRIPTION
Page 118 NEAX 2000 IPS General Description
NDA-24345, Issue 3
DID Call Waiting
This feature allows an incoming call on a DID trunk or a tie line to automatically be Camped-On
to the destination station if the destination station is busy.
DID Digit Conversion
This feature allows the NEAX2000 IPS to convert the digits received from the serving C.O. to
valid station numbers when the C.O. numbering plan differs from the desired station numbering
plan.
DID Name Display
This feature allows Name Assignment for a DID Number received from a Public Network, and
displays the name on an LCD of a Multi-line Terminal or Attendant Console.
Direct Inward System Access (DISA)
This feature allows an outside caller to access the system using an exchange network connection
without Attendant or station assistance. The outside user may originate calls over any or all of the
system's facilities such as WATS, FX, Tie Line or CCSA. The outside user can also directly call
stations and access miscellaneous trunks for such features as dictation access.
Call Forwarding set by DISA
This feature allows an outside caller to set Call Forwarding – All Calls Direct Inward System
Access (DISA) code.
Direct Inward Termination (DIT)
This feature automatically routes incoming network exchange calls directly to a pre-selected station
without Attendant assistance. The call can then be processed by the called party. Three-party
Conference, Call Transfer, etc., are handled in the same manner as any normal trunk call.
Direct Outward Dialing (DOD)
This feature permits any station user the ability to gain access to the exchange network by dialing an
access code and receiving new dial tone. The user may then proceed to dial the desired exchange
network number.
Direct Station Selection/Busy Lamp Field (DSS/BLF) Console
This feature allows a Direct Station Selection/Busy Lamp Field (DSS/BLF) Console to be associated
with a legacy Multiline Terminal. When the buttons on the DSS/BLF Console unit are programmed
for Direct Station Selection (DSS) buttons, up to 60 stations can be directly accessed in addition to
those already appearing on the Multiline Terminal. Busy status for each station is indicated by a red
LED associated with each button. In addition, the DSS console can provide the following functions:
• Message Waiting - Set/Cancel/Status Display
• Do Not Disturb - Set/Cancel/Status Display
• Automatic Wake Up No Answer - Status Display/Cancel
• Agent Busy Out - UCD - Status Display
• Line Lockout - Status Display
• Room Cutoff - Set/Cancel/Status
Busy Out Status Console
This feature allows a DSS/BLF Console unit associated with a Multiline Terminal to be used
as a Busy Out Status Console. This feature is activated by use of a Function Mode key on a
DSS/BLF Console. Busy Out Status for each station is indicated by a red LED associated with
each button.