User manual

CHAPTER 4 EQUIPMENT DESCRIPTION
Page 102 NEAX 2000 IPS General Description
NDA-24345, Issue 3
Application Processor (AP) Cards (Cont.)
Abbrev Name Code Ports Remarks
CCH SPN-SC00 CCH-D
1 Common Channel Handler for CCIS
1 per Destination-Site (Max 8 per sys)
Required for Event Based CCIS, T1
Drop/Insert CCIS w/external DSU or Fractional
T1-CCIS. Event Based CCIS requires using
ISDN PRI or BRI trunks with the CCH-D. T1
CCIS requires using a 24DTA with the CCHD.
1 AP Time Slot with out Central Billing. 1 to 9
APTS dependant on Central Billing Dependant
on Position in Network. Center Office,
2 APTS per CCH Link. Tandem Office, 2
APTS /CCH. Link + (# of CCH Links-1), End
Office, 1 Link Only, 2 AP Time Slots.
AP Number 4-15 & 20-31 Lower AP Hwy
DCH SPN-SC01 DCH-C
1 D-Channel Handler for ISDN PRI
Uses 1 Application Time Slot\AP Number 4-15
& 20-31 Lower AP Hwy.
Requires using 24DTA and DCH-C.
ICH SPN-SC03B 8ICH
4 D-Channel Handler (8ICH) with Flash ROM
Uses 4 Application Time Slots, Required for
BRI Station Side (One SC03 for every four PN-
2ILCA cards) AP Number 4-12, Lower AP Hwy
CSH SPN-SC03B 8CSH-C 4 Wireless ZT Handler (CSH) with Flash ROM
Supports both S-Interface and U-Interface.
Supports Short Text Message and Dukane
Nurse Call system. Uses 4 Application Time
Slots. IPS can use PN-4CSIA-A (U-Interface)
or SPN-2CSIA. (S-Interface). Retrofit must use
SPN-2CSIA. (S-Interface) only. This card is
required to expand the number of PS from 256
to 512.
SPN-SC01 QSIG 1 QSIG Protocol Handler
Basic Calling Supported (Receive, Originate)
Supports I /A /W ETSI, ETS-300-172; Uses 1
Application Time Slot. AP Number 4-15 & 20-
31 Lower AP Hwy Used with SPN-24DTAC-B
(AP)
SIG
SPN-24PRTA-QSIG
(AP)
25 QSIG combo card with Protocol Handler and
24DTAC. Supports the following
Supplementary Services (SS): SS-CLIP, SS-
CLOP, SS-CLIR, SS-CONP, SS-CNIR and
SS-CONR. Implementation of ID-SS (ETS 300
173) and Name ID-SS (ETS 300 238) is based
on basic specifications of ETS 300 172 by
ETSI at the Q reference point between PBX’s