User manual

CHAPTER 4 EQUIPMENT DESCRIPTION
NEAX 2000 IPS General Description Page 101
NDA-24345, Issue 3
Application Processor (AP) Cards
The AP cards may be installed in slot 00 to 11 of PIM 0-7, with the following conditions:
• Maximum 24 cards per system
• Maximum 256 ports per system
Abbrev Name Code Ports Remarks
SPN-24DTAC-B
24 1.5M Digital Trunk Interface
Uses 24 Application Time Slots
Max of 240 DTI Ports, AP Number 4-15 & 20-31
Lower AP Hwy and Upper AP Hwy.
Retrofit to use upper highway must mount in PIM
0 Applications; Max 10 T1 1.5M AMI (24ch), Max
8 ISDN-PRI (23B+D) w/ Max 8 SPN-SC01 DCH-C
(AP), Max 8 CCIS (23B+C) w/ Max 8 SPN-SC00
CCH-D (AP). -DTE Jitter Transfer, -Fuse capacity
(500mA), Built-In CSU.
DTI
SPN-30DTC-UA 31 2M Digital Trunk Interface
Uses 31 Application Time Slots. Max of 120 DTI
Ports w/this Interface. AP Number 4-15 & 20-31
Lower AP Hwy Applications; 2M AMI (30ch) T1,
CCIS (30B+C) requires SPN-SC00, CCH-D (AP)
for each CCIS Link.
PRT SPN-24PRTA-C
25 Digital Trunk/ D-Channel Handler (T1/DCH)
Provides ISDN Name Display NI-2. Combination
Card includes T1 and DCH. 1.5M Digital Trunk
Interface. Uses 25 Application Time Slots.
Max 8 ISDN PRI w/this Interface AP Number 4-15
& 20-31 Lower AP Hwy and Upper AP Hwy.
Applications; ISDN-PRI (23B+D), -DTE Jitter
Transfer, -Fuse capacity (500mA), Built-In CSU.
CCT SPN-24CCTA-A
25 Digital Trunk/ C-Channel Handler (T1/CCH)
Combination Card includes T1 and CCH, 1.5M
Digital Trunk Interface.
Uses 25 Application Time Slots. Max 8 CCIS
Links with this Interface. AP Number 4-15 & 20-31
Lower AP Hwy and Upper AP Hwy. Applications;
CCIS with Point to Point T1.
SPN-BRTC
4 1 Circuit BRI Trunk
National ISDN-Uses 2 Application, Time Slots AP
Number 4-15 & 20-31 Lower AP Hwy
BRT
SPN-4BRTA-D 8 4 circuit Basic Rate (2B+D) Interface Trunk Card
Accommodates four two channel PCM digital
lines. Both Point to Point and Point to Multi-Point
are supported.