Printer User Manual
Table Of Contents
- CONTENTS
- Ch1. Introduction
- Ch2. Setting-Up
- Ch3. Using the Printer
- Ch4. Printer Driver
- Introduction
- System Requirements
- Installing the PagePro 1100 Printer Driver Under Windows 95/Windows 98/ Windows NT 4.0
- Installing the PagePro 1100 Printer Driver Under Windows 3.1
- Displaying the PagePro 1100 Printer Driver Setup Dialog
- Using the PagePro 1100 Printer Driver Setup Dialog
- Uninstalling the Printer Driver
- DOS Printing Utilities
- Ch5. Printer Status Monitor and Control Panel
- Ch6. Maintenance
- Ch7. Troubleshooting
- Ch8. Specifications
- AppA. Glossary
- AppB. Index
7-15
Chapter 7Troubleshooting
Print Quality Problems
No Output
Symptom Cause Remedy
Failure to pro-
duce output
There is a com-
munications
problem
between the
printer and your
computer.
Check printer cable type
against the specifications in
“Interface Connector and
Cable” on page 8-6.
Note
◆ When checking the cable
type, make sure that the
printer and the computer
you are connecting it to
are both turned off.
◆ When connecting your
computer to the parallel
connector on the printer,
we recommend using a
IEEE1284 Type B-compli-
ant interface cable.
◆ Be sure to exit Status
Monitor before connecting
the computer to the
printer using a parallel
cable.
If problems persist, contact
your dealer.