User's Manual

English−54
Tools
Tools Menu
Area marker
Area marker Shows a marker by a frame or line.
NOTE: When a line marker is displayed for a long time, LCD panel may have image sticking phenomena.
To avoid it a frame marker is recommended.
Size Adjusts the size of the marker.
Aspect Adjusts the aspect ratio of the marker.
Color Selects the color of a line marker or the brightness of a frame marker.
Import / Export
Import / Export Imports or exports the settings of your display to a USB storage device (see page 36).
NOTE: • The Import function will overwrite the current monitor settings. If needed, backup the current
settings using the export function before importing new settings.
• Some monitor specific settings, such as calibration records, are not exported.
• If the IP address is set manually, make sure it is a unique address and there is no duplicate on
the network.
Information
Info Menu
Monitor information Shows the model name, serial number, input signal and audio information for your monitor.
SpectraView engine status Shows the status of internal sensors and the calibration information for your monitor.
USB information Shows the USB hub and USB-C data setting.
System information Shows the firmware version, SpectraView engine status, hours running, carbon savings, carbon usage
and MAC address of your monitor.
Hours running: Show total running time.
Carbon savings: Shows the estimated carbon saving information in kg-CO2. The carbon footprint factor in
the carbon saving calculation is based on the OECD (2008 Edition).
Carbon usage: Shows the estimated carbon usage information in kg-CO2. This is an arithmetic estimation,
not an actual measurement value. This estimation is based on the monitor settings only and does not
account for any connected devices.