User's Manual

English−31
English
Using the USB-C port functions
The following features are simultaneously available via a single USB-C connection to a suitably equipped computer:
• Video and audio delivered by DisplayPort Alt Mode at up to 4K60Hz RGB10bit resolution.
• Connecting USB devices such as keyboards, mice and USB flash drives at speeds up to 5.0Gbps.
• USB power delivery to charge the connected computer’s battery with/at up to 65W.
USB-C
Video / Audio
Battery charge / USB hub
NOTE: • These functions can be used concurrently; however, the actual behavior depends on the connected computer port
or cable.
• You can check the actual status from the [USB data setting].
To open the USB-C settings menu:
1. Touch the Menu key.
2. Navigate to the USB menu then highlight the [USB-C settings] function.
3. Touch the > key to highlight [Power delivery] limit.
4. Touch the < or > keys to raise or lower the power limit.
5. Touch the Exit key to save the change and exit the setting.
Video and audio function
• Please use a computer port with the DP Alt Mode compliance logo.
HDMI Alt Mode or MHL is not supported.
• Please use a SuperSpeed USB 10Gbps (USB 3.1 Gen 2) cable with USB compliance logo.
Hi-Speed USB (USB2.0) cable or charging cable doesn’t support video transmission.
USB Power delivery function
• Please use a computer and cable with USB Power Delivery compliance logo.
• If the connected device is not recognized, the information shows [---]. The power might be supplied.