Operation Manual

28
3. Convenient Features
 Changing Eco Mode/Checking Energy-Saving Effect Using Eco
Mode [ECO MODE]
TheECOMODE(ECO1)increaseslamplife,whileloweringpowerconsumptionandcuttingdownonCO
2
emis-
sions.
Threebrightnessmodesofthelampcanbeselected:[OFF],[AUTOECO],and[ECO1]modes.
[ECOMODE] Description StatusofLAMPindicator
[OFF] Thisisthedefaultsetting(100%Brightness). Off
[AUTOECO] Lamppowerconsumptionwillbechangedbetween
[OFF]and[ECO1]automaticallyaccordingtopicture
level
NOTE:Abrightgradationmaybelessvisibledepending
ontheimage.
SteadyGreen
light
[ECO1]
Lowlamppowerconsumption(approx.75%Bright-
ness).
Toturnonthe[ECOMODE],dothefollowing:
1. PresstheECOButtonontheremotecontroltodisplay[ECOMODE]screen.
2. PresstheECObuttonagaintoselectamodeyouwish.
• EachtimetheECObuttonispressed,thechoiceswillbechanged:
OFF → AUTO ECO → ECO1 → OFF
• WhentheprojectorisinECOmode,theLAMPindicatorwilllightgreen.
TIP:
• TheleafsymbolatthebottomofthemenushowsthecurrentselectionofECOmode.
2. Pressthe button.
The area of the magnified image will be moved
3. PresstheD-ZOOM(−)button.
Each time the D-ZOOM (−) button is pressed, the image is reduced.
NOTE:
• Theimagewillbeenlargedorreducedatthecenterofthescreen.
• Displayingthemenuwillcancelthecurrentmagnication.