Operation Manual

116
5. Using On-Screen Menu
17. Onthethumbnailscreen,selectadigitalcerticate(DERformatle)savedinyourUSBmemorydevice
andpresstheENTERbutton.
• SelectyourrootCAcerticatehere.
The selected digital certificate will be installed on the projector.
18. Aftercompletingrequiredsettings,select[OK]andpresstheENTERbutton.
The [WIRELESS] page will be returned.
19. Select[RECONNECT]andpresstheENTERbutton.
20. Select[OK]andpresstheENTERbutton.
Thiswillcompletesetting[EAP-TLS]for[EAPTYPE]in[WPA-EAP]or[WPA2-EAP].
TIP:
Clearing the digital certicate that is installed on the projector
Toclearthedigitalcerticateinstalledontheprojector,followthestepsbelow.
Bydoingthefollowingprocedure,allthedigitalcerticatesforthecurrentlydisplayedprolewillbecleared.
1. Select [CLEAR CERTIFICATES] in the bottom left of the [AD-
VANCED]settingscreenandpresstheENTERbutton.
A message for confirmation will be displayed.
2. Select[YES]andpresstheENTERbutton.
The digital certificates will be cleared.
TIP:
• ThePKCS#12formatdigitalcerticateincludingaCAcerticatewillbeinstalledasarootCAcerticate.
② Selecting [PEAP-MSCHAPv2] for [EAP TYPE]:
12. Fromthe[AUTHENTICATION]page,select[EAPTYPE]eldandpresstheENTERbutton.
The pull-down list will be displayed.
13. Select[PEAP-MSCHAPv2]andpresstheENTERbutton.
14. Select[USERNAME]eldandpresstheENTERbutton.
 Thecharacterentryscreen(softwarekeyboard)willbedisplayed.Setausername.
• Ausernamemustbe32charactersorless.
(→ page 118)