Operation Manual

5. Using On-Screen Menu

[OPTIONS(2)]

Selecting Power-saving in [STANDBY MODE]

Theprojectorhastwostandbymodes:[NORMAL]and[POWER-SAVING].

ThePOWER-SAVINGmodeisthemodethatallowsyoutoputtheprojectorinthepower-savingconditionwhich

consumeslesspowerthantheNORMALmode.TheprojectorispresetforNORMALmodeatthefactory.

NORMAL �� Power indicator: Orange light/STATUS indicator: Green light

POWER-SAVING

�� Power indicator: Red light/STATUS indicator: Off

The following connectors, buttons or functions will not work during this mode�

- MONITOR OUT (COMP� 1) connector, and AUDIO OUT connector

- LAN and Mail Alert functions

- Buttons other than POWER button on the cabinet

- Buttons other than POWER ON button on the remote control

- Virtual Remote Tool, USB Display fucntion

NOTE:

• When[CONTROLPANELLOCK],[CONTROLID],or[AUTOPOWERON(COMP1)]isturnedon,the[STANDBYMODE]settingis

notavailable.

• Evenwhen[POWER-SAVING]isselectedfor[STANDBYMODE],poweronoroffcanbedonebyusingthePCCONTROLport.

• ThepowerconsumptioninthestandbymodewillnotbeincludedincalculatingCO

emissionreduction.

• Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.

Enabling Auto Power On [AUTO POWER ON(AC)]

Turnstheprojectoronautomaticallywhenthepowercordisinsertedintoanactivepoweroutlet.Thiseliminatesthe

needtoalwaysusethePOWERbuttonontheremotecontrolorprojectorcabinet.