Operation Manual

98
5. Using On-Screen Menu
Selecting Signal Format [SIGNAL SELECT]
[COMPUTER1],[COMPUTER2]
Allowsyoutochoose[COMPUTER1],or[COMPUTER2]foranRGBsourcesuchasacomputer,or[COMPONENT]
foracomponentvideosourcesuchasaDVDplayer.Normallyselect[RGB/COMPONENT]andtheprojectorauto-
maticallydetectsacomponentsignal.Howevertheremaybesomecomponentsignalsthattheprojectorisunableto
detect.Ifthisisthecase,select[COMPONENT].
[VIDEO&S-VIDEOSystemSelect]
Thisfeatureenablesyoutoselectcompositevideostandardsautomaticallyormanually.
Normallyselect[AUTO]andtheprojectorwillautomaticallydetectthevideostandard.
Inthecasewheretheprojectorhasdifcultydetectingthevideostandard,selecttheappropriatevideostandardfrom
themenu.
ThismustbedoneforVIDEOandS-VIDEOrespectively.
Enabling or Disabling WXGA Mode [WXGA MODE]
Selecting[ON]willgiveprioritytoaWXGA(1280×768)signalinrecognizinganinputsignal.
When[WXGAMODE]issetto[ON],anXGA(1024×768)signalmaynotberecognizedonP420X/P350X.Inthis
case,select[OFF].
NOTE:
• The[OFF]isselectedatthetimeofshipmentofP420X/P350X.
• The[ON]isselectedatthetimeofshipmentofP350W.
Enabling the deinterlace [DEINTERLACE]
Turnsonoroffthedeinterlacefunctionforatelecinesignal.
OFF ������������������������ Select this option if there is any jitter or artifacts in video�
ON ������������������������� Default standard setting�
NOTE:ThisfeatureisnotavailableforHDTV(progressive)andcomputersignals.
Setting HDMI [HDMI SETTINGS]
MakethesettingsforvideolevelandaudiolevelwhenconnectingHDMIequipmentsuchasaDVDplayer.
VIDEO LEVEL ��������� Select [AUTO] to automatically detect video level� If automatic detection may not work well, select [NOR-
MAL] to disable the [ENHANCED] feature of your HDMI equipment or select [ENHANCED] to improve image
contrast and increase detail in the dark areas�
AUDIO SELECT ������ Select [HDMI] to switch the HDMI IN digital audio signal and select [COMPUTER 2] to switch the COMPUTER
2 input audio signal�
Enabling Key Sound and Error Sound [BEEP]
Thisfeatureturnsonoroffthebuttonsoundoralarmwhenanerroroccursorthefollowingoperationsareper-
formed.
-Displayingthemainmenu
-Switchingsources
-Resettingdatabyusing[RESET]
-PressingPOWERONorPOWEROFFbutton
[TOOLS]
See“APPLICATIONMENU”onpage123.