Operation Manual

6. Maintenance

5. Connect the supplied power cable, turn on the Main Power switch and turn on the projector.

6. Finally, select the menu

→

[RESET]

→

[CLEAR LAMP HOURS] to reset the lamp life remaining and lamp

usage hours.

NOTE: When you continue to use the projector for another 100 hours after the lamp has reached the end of its life, the projector

cannot turn on and the menu is not displayed.

Ifthishappens,presstheHELPbuttonontheremotecontrolfor10secondstoresetthelampclockbacktozero.

Whenthelamptimeclockisresettozero,theLAMPindicatorgoesout.

4. Reattach the lamp cover.

Slip the lamp cover back until it snaps into place.