Operation Manual

Menu Descriptions & Functions [RESET]

ReturningtoFactoryDefault[RESET]

TheRESETfeatureallowsyoutochangeadjustmentsandsettingstothefactorypresetfora(all)source(s)except

thefollowing:

[CURRENTSIGNAL]

Resetstheadjustmentsforthecurrentsignaltothefactorypresetlevels.

Theitemsthatcanberesetare:[PRESET],[CONTRAST],[BRIGHTNESS],[SHARPNESS],[COLOR],[HUE],

[CLOCK],[PHASE],[HORIZONTAL],[VERTICAL],[OVERSCAN],and[ASPECTRATIO].

[ALLDATA]

Resetalltheadjustmentsandsettingsforallthesignalstothefactorypreset.

All items can be reset EXCEPT [LANGUAGE], [BACKGROUND], [FILTER MESSAGE], [SECURITY], [COM-

MUNICATIONSPEED],[CONTROLID],[FANMODE],[STANDBYMODE],[LAMPLIFEREMAINING],[LAMP

HOURSUSED],[FILTERHOURSUSED],[TOTALCARBONSAVINGS],and[NETWORKSETTINGS].

Toresetthelampusagetime,see“ClearingLampHourMeter[CLEARLAMPHOURS]”below.

ClearingNetworkingSettings[NETWORKSETTINGS]

Returns[DHCP],[IPADDRESS],[SUBNETMASK],and[GATEWAY]tothedefaultsettings.

ClearingLampHourMeter[CLEARLAMPHOURS]

Resetsthelampclockbacktozero.Selectingthisoptiondisplayssubmenuforaconrmation.Select[YES]and

presstheENTERbutton.

NOTE: Elapsed time of the lamp use will not be affected even when [RESET] is done from the menu.

NOTE: The projector will turn off and go into standby mode when you continue to use the projector for another 100 hours after

the lamp has reached the end of its life. In this condition you cannot clear the lamp hour meter on the menu. If this happens,

presstheHELPbuttonontheremotecontrolfor10secondstoresetthelampclockbacktozero.Dothisonlyafterreplacingthe

lamp.

ClearingtheFilterUsageHours[CLEARFILTERHOURS]

Resetsthelterusagebacktozero.Selectingthisoptiondisplayssubmenuforaconrmation.Select[YES]and

presstheENTERbutton.

NOTE: Elapsed time of the ﬁlter use will not be affected even when [RESET] is done from the menu.

5. Using On-Screen Menu