Operation Manual

TurningOntheProjectorByApplyingComputerSignal[AUTOPOWERON(COMP1/2)]
WhentheprojectorisinStandbymode,applyingacomputersignalfromacomputerconnectedtotheCOMPUT-
ER1INorCOMPUTER2INinputwillpowerontheprojectorandsimultaneouslyprojectthecomputer’simage.
ThisfunctionalityeliminatestheneedtoalwaysusethePOWERbuttonontheremotecontrolortheprojectorcabi-
nettopowerontheprojector.
Tousethisfunction,rstconnectacomputertotheprojectorandtheprojectortoanactiveACinput.
NOTE:
• Disconnectingacomputer signal fromthecomputerwillnot power offtheprojector.Werecommend usingthis functionin
combination of the AUTO POWER OFF function.
• Thisfunctionwillnotbeavailableunderthefollowingconditions:
- when a component signal is applied to the COMPUTER1 IN or COMPUTER2 IN connector
- whenaSynconGreenRGBsignalorcompositesyncsignalisapplied
- when[COMPUTER2]issetto[VIDEO]for[SIGNALSELECT]
• ToenabletheAUTOPOWERON(COMP1/2)afterturningofftheprojector,wait3secondsandinputacomputersignal.
If a computer signal is still present when the projector is turned off, the AUTO POWER ON (COMP1/2) will not work and the
projector remains in standby mode.
EnablingPowerManagement[AUTOPOWEROFF]
Whenthisoptionisselectedyoucan enabletheprojectortoautomatically turnoff(attheselectedtime: 5min.,
10min.,20min.,30min.)ifthereisnosignalreceivedbyanyinputorifnooperationisperformed.
SelectingDefaultSource[DEFAULTSOURCESELECT]
Youcansettheprojectortodefaulttoanyoneofitsinputseachtimetheprojectoristurnedon.
LAST ���������������������� Sets the projector to default to the previous or last active input each time the projector is turned on�
AUTO ��������������������� Searches for an active source in order of COMPUTER1
→
COMPUTER2
→
COMPUTER3
→
VIDEO
→
S-
VIDEO
→
COMPUTER1 and displays the first found source�
COMPUTER1 ��������� Displays the computer signal from the COMPUTER 1 IN connector every time the projector is turned on�
COMPUTER2 ��������� Displays the computer signal from the COMPUTER 2 IN connector every time the projector is turned on�
COMPUTER3 ��������� Displays the DVI digital from the COMPUTER 3 (DVI-D) IN connector every time the projector is turned
on�
VIDEO �������������������� Displays the Video source from the VIDEO IN connector every time the projector is turned on�
S-VIDEO ���������������� Displays the Video source from the S-VIDEO IN connector every time the projector is turned on�
SettingMONITOROUTConnector[OUTTERMINAL]
ThisoptionallowsyoutodeterminewhichRGBorcomponentsourceisoutputfromtheMONITOROUTconnector
duringStandbymode.
LAST ���������������������� The signal from the last COMPUTER 1 or COMPUTER 2 input will be output to the MONITOR OUT con-
nector and AUDIO OUT jack�
COMPUTER 1 �������� The signal from the COMPUTER 1 input will be output to the MONITOR OUT connector and AUDIO OUT
jack�
COMPUTER 2 �������� The signal from the COMPUTER 2 input will be output to the MONITOR OUT connector and AUDIO OUT
jack�
NOTE:When[COMPUTER1]or[COMPUTER2]isselectedfor[AUTOPOWERON(COMP1/2)],the[OUTTERMINAL]featureis
not available.
73
5. Using On-Screen Menu