Operation Manual

SelectingSignalFormat[SIGNALSELECT]

[COMPUTER1],[COMPUTER2]

Allowsyoutoset [COMPUTER1] and[COMPUTER2] toautomatically detect anincoming RGB or component

sourcesuchasacomputerorDVDplayer.HowevertheremaybesomeRGBandcomponentsignalsthatthepro-

jectorisunabletodetect.Inthiscase,select[RGB]or[COMPONENT].

NOTE ([COMPUTER 2] only):

Whenusingthe"G/Y"connectoroftheCOMPUTER2INconnectorstodisplayaVideosignal,select[VIDEO].

SelectingColorSystem[COLORSYSTEM]

Thisfeatureenablesyoutoselectvideostandardsmanually.

Normallyselect[AUTO].Selectthevideostandardfromthemenu.ThismustbedonefortheCOMPUTER2INcon-

nectors,VIDEO,orS-VIDEOconnectorseparately.

EnablingorDisablingWXGAMode[WXGAMODE]

Selecting[ON]willgiveprioritytoaWXGA(1280x768)signalinrecognizinganinputsignal.

When[WXGAMODE]issetto[ON],anXGA(1024x768)signalmaynotberecognized.Inthiscase,select[OFF].

Enablingthedeinterlace[DEINTERLACE]

Turnsonoroffthedeinterlacefunctionforatelecinesignal.

OFF �� Select this option if there is any jitter or artifacts in video�

ON �� Default standard setting�

NOTE:ThisfeatureisnotavailableforRGB,480p,576pandHDTVsignals.

5. Using On-Screen Menu