Operation Manual

SelectingAspectRatio[ASPECTRATIO]
Theterm“aspectratio”referstotheratioofwidthtoheightofaprojectedimage.
Theprojectorautomaticallydeterminestheincomingsignalanddisplaysitinitsappropriateaspectratio.
•Thistableshowstypicalresolutionsandaspectratiosthatmostcomputerssupport.
Resolution AspectRatio
VGA  640x480  4:3
SVGA  800x600  4:3
XGA  1024x768  4:3
WXGA  1280x768  15:9
WXGA  1280x800  16:10
WXGA+  1440x900  16:10
SXGA  1280x1024  5:4
SXGA+  1400x1050  4:3
UXGA  1600x1200  4:3
Options Function
AUTO Theprojectorwillautomaticallydeterminetheincomingsignalanddisplayitinitsas-
pectratio.(→ nextpage)
Theprojectormayerroneouslydeterminetheaspectratiodependingonitssignal.If
thisoccurs,selecttheappropriateaspectratiofromthefollowing.
4:3 Theimageisdisplayedin4:3aspectratio.
16:9 Theimageisdisplayedin16:9aspectratio.
15:9 Theimageisdisplayedin15:9aspectratio.
16:10 Theimageisdisplayedin16:10aspectratio.
WIDEZOOM Theimageisstretchedleftandright.
Partsofthedisplayedimagearecroppedattheleftandrightedgesandthereforenot
visible.
NATIVE Theprojectordisplaysthecurrentimageinitstrueresolutionwhentheincomingcom-
putersignalhasalowerresolutionthantheprojector’snativeresolution.
[Example]Whentheincomingsig-
nalwiththeresolutionof800x600
isdisplayed:
NOTE:
• Whenanon-computersignalisdisplayed,the[NATIVE]isnotavailable.
• Whenasignalwithahigherresolutionthantheprojector’snativeresolutionisdisplayed,[NA-
TIVE] is not available.
60
5. Using On-Screen Menu