Operation Manual

9
Using the VGA Signal Cable to Operate the Projector (Virtual
Remote)
Usingtheutilitysoftware“VirtualRemoteTool”includedonthecompanionNECProjectorCD-ROM,VirtualRemote
screen(ortoolbar)canbedisplayedonyourcomputerscreen.
Thiswillhelpyouperformoperationssuchasprojector’spoweronoroffandsignalselectionviatheVGAsignal
cable.
VirtualRemotescreen Toolbar
ThissectionprovidesanoutlineofpreparationforuseofVirtualRemoteTool.
ForinformationonhowtouseVirtualRemoteTool,seeHelpofVirtualRemoteTool.(
→
page47)
Step1:InstallVirtualRemoteToolonthecomputer.
Step2:Connecttheprojectortothecomputer.(
→
page45)
Step3:StartVirtualRemoteTool.(
→
page46)
NOTE:
• When[COMPUTER1]isselectedfromyoursourceselection,theVirtualRemotescreenorthetoolbarwillbedisplayedaswell
as your computer screen.
• UsethesuppliedVGAsignalcabletoconnecttheCOMPUTER1INconnectordirectlywiththemonitoroutputconnectorofthe
computer to use Virtual Remote Tool.
 UsingaswitcherorothercablesthanthesuppliedVGAsignalcablemaycausefailureinsignalcommunication.
 VGAcableconnector:
 PinNos.12and15arerequiredforDDC/CI.
• VirtualRemoteToolmaynotworkdependingonyourcomputer’sspecicationsandversionofgraphicadaptersordrivers.
TIP:
• Theprojector’sCOMPUTER1INconnectorsupportsDDC/CI(DisplayDataChannelCommandInterface).DDC/CIisastandard
interface for bidirectional communication between display/projector and computer.
• ForupdateinformationonVirtualRemoteTool,visitourwebsite:http://www.nec-display.com/dl/en/index.html
Step 1: Install Virtual Remote Tool on the computer
Supported OS
VirtualRemoteToolwillrunonthefollowingoperatingsystems.
Windows7HomeBasic*
1
,Windows7HomePremium*
1
,Windows7Professional*
1
,Windows7Enterprise*
1
,
Windows7Ultimate*
1
WindowsVistaHomeBasic*
1
,WindowsVistaHomePremium*
1
,WindowsVistaBusiness*
1
,WindowsVista
Enterprise*
1
,WindowsVistaUltimate*
1
WindowsXPHomeEdition*
2
,WindowsXPProfessional*
2
,Windows2000Professional*
2
*1:Supports32-bitversion.
*2:TorunVirtualRemoteTool,“Microsoft.NETFrameworkVersion2.0orlater”isrequired.TheMicrosoft.NET
FrameworkVersion2.0orlaterisavailablefromMicrosoft’swebpage.InstalltheMicrosoft.NETFramework
Version2.0orlateronyourcomputer.Windows2000ProfessionalsupportsMicrosoft.NETFrameworkVer-
sion2.0only.
43
4. Convenient Features