Nec NP2200 : Operation Manual : Page 53

AlertMailSetting

http://<theprojector’sIPaddress>/lancong.html

Thisoptionnotiesyourcomputerofanerrormessageviae-mailwhenusingwiredLAN.Anerrormessagenoti-

cationwillbesentwhentheprojectorlamphasreachedtheendofitsusablelifeoranerroroccursintheprojector.

HOST NAME ��Type in the hostname of the network connected to the projector� Up to 60 alphanumeric

characters can be used� If the host name is unknown, type in a string of characters repre-

senting the projector� Example: Projector 1

DOMAIN NAME ��Type in the domain name of the network connected to the projector� Up to 60 alphanu-

meric characters can be used� If the domain name is unknown, type in the right side of @

in the sender’s address� Example: nec� com

ALERT MAIL ��Checking [ENABLE] will turn on the Alert Mail feature�

Checking [DISABLE] will turn off the Alert Mail feature�

SENDER’S ADDRESS ��Type in the senders address� Up to 60 alphanumeric and symbols characters can be used�

SMTP SERVER NAME ��Type in the SMTP server name to be connected to the projector� Up to 60 alphanumeric

characters can be used�

RECIPIENT’S ADDRESS 1 to 3 ��Type in your recipient’s address� Up to 60 alphanumeric and symbols characters can be

used�

APPLY ��Click this button to reﬂect the above settings

EXECUTE ��Click this button to send a test mail to check if your settings are correct�

STATUS ��A reply to a test mail will be displayed�

NOTE:

• Ifyouexecuteatest,youmaynotreceiveanAlertmail.Shouldthishappen,checkifthenetworksettingsarecorrect.

• Ifyouenteredanincorrectaddressinatest,youmaynotreceiveanAlertmail.Shouldthishappen,checkiftheRecipient’s

Address is correct

TIP: The Alert Mail settings will not be affected even when [RESET] is done from the menu.

42

4. Convenient Features