Operation Manual


Changing Eco Mode
Thisfeatureenablesyoutoselecttwobrightnessmodesofthelamp:
OFFandONmodes.Thelamplifecanbeextendedbyturningonthe[ECOMODE].
[ECOMODE] Description StatusofLAMPindicator
[OFF] Thisisthedefaultsetting(100%Brightness). Off
STATUS
LAMP
[ON] Selectthismodetoincreasethelamplife(approx.
80% Brightness onNP3200andapprox. 88%
BrightnessonNP2200/NP1200).
SteadyGreenlight
STATUS
LAMP
ON
OFF
AUTO ADJ.
COMPUTER
VIDEO
S-VIDEO
VIEWER
ID SET
CLEAR
AV-MUTE FREEZE
ENTER
EXIT
ECO MODE
KEYSTONE
PICTURE
VOL.
HELP
FOCUS
ASPECT
123
456
789
0
MENU
ZOOM
L
-CLICK
R
-CLICK
MOUSE
P
A
G
E
M
A
G
N
I
F
Y
POWER
＋
Toturnonthe[ECOMODE],dothefollowing:
1. Press the ECO MODE button on the remote control to display
[ECO MODE] screen.
2. Use the

or

button to select [ON].
3. Press the ENTER button.
 Tochangefrom[ON]to[OFF],GobacktoStep2andselect[OFF].
Repeat Step 3.
NOTE:
• The[ECOMODE]canbechangedbyusingthemenu.
Select [SETUP]
→
[GENERAL]
→
[ECO MODE].
• The lamplife remaining and lamp hours usedcan be checkedin [USAGE
TIME]. Select [INFO.]
→
[USAGETIME].
• [ECOMODE]isalwayssetto[OFF]for1minuteimmediatelyafterthelampis
turned on. The lamp condition will not be affected even when [ECO MODE] is
changed.
• Afteralapseof1minutefromwhentheprojector displays a blue, blackor
logo screen, [ECO MODE] will automatically switch to [ON].
• Iftheprojectorisoverheatedin[OFF]mode,theremaybeacasewherethe
[ECO MODE] automatically changes to [ON] mode to protect the projector.
When the projector is in [ON] mode, the picture brightness decreases. When
the projector comes back to normal temperature, the [ECO MODE] returns to
[OFF] mode.
Thermometer symbol [ ] indicates the [ECO MODE] is automatically set to
[ON] mode because the internal temperature is too high.
33
4. Convenient Features