Operation Manual

29
3. Projecting an Image (Basic Operation)
Adjusting from the menu
1. Press the MENU button.
 Themenuwillbedisplayed.
2. Press the

button to select [SETUP] and press the ENTER button.
 The[GENERAL]screenwillbedisplayed.
3. Press the

button to select [KEYSTONE].
4. Press the

or

button.
 Adjustsothattheimageisrectangular.
5. After completing adjustment, press the EXIT button three times.
 Themenuwillbeclosed.
NOTE: The Keystone correction can cause an image to be slightly blurred because the correction is made electronically.
TIP: The changes can be saved with [KEYSTONE SAVE]. (
→
page 63)