Operation Manual

18
AUDIOIN
LR
AUDIOOUT
L R
VIDEOOUT
S-VIDEO VIDEO
S-VIDEO IN
VIDEO IN
AUDIO IN
2. Installation and Connections
Connecting Your VCR
S-Videocable(notsupplied)
Videocable(notsupplied)
VCR
Audioequipment
Audiocable(notsupplied)
TIP:Youcanconnectavideocabletothe“G/Y”connectoroftheCOMPUTER2IN(BNC)connectorstodisplayaVCRsource.To
do so, from the menu, select [SETUP]
→
[OPTIONS(1)]
→
[SIGNALSELECT]
→
[COMPUTER 2]
→
[VIDEO]. (
→
page 71)
• Selectthesourcenameforitsappropriateinputconnectorafterturningontheprojector.
Inputconnector
SOURCEbuttonontheprojector
cabinet
Buttonontheremotecontrol
VIDEOIN
VIDEO
(VIDEO)
S-VIDEOIN
S-VIDEO
(S-VIDEO)
NOTE:TheAUDIOINLandRjacks(RCA)aresharedbetweentheVideoandS-Videoinputs.
NOTE:RefertoyourVCRowner’smanualformoreinformationaboutyourequipment’svideooutputrequirements.
NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via
a scan converter.