LCD Projector NP3200/NP2200/NP1200 User’s Manual The NP3200 is not distributed in North America.
1st edition, October 2009 • IBM is a trademark or registered trademark of International Business Machines Corporation. • Macintosh, Mac OS X and PowerBook are trademarks of Apple Inc., registered in the U.S. and other countries. • Microsoft, Windows, Windows Vista, Internet Explorer, .NET Framework and PowerPoint are either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Important Information Safety Cautions Precautions Please read this manual carefully before using your NEC NP3200/NP2200/NP1200 projector and keep the manual handy for future reference. CAUTION To turn off main power, be sure to remove the plug from power outlet. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. CAUTION TO PREVENT SHOCK, DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.
Important Information WARNING TO CALIFORNIA RESIDENTS: Handling the cables supplied with this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. WASH HANDS AFTER HANDLING. Disposing of your used product EU-wide legislation as implemented in each Member State requires that used electrical and electronic products carrying the mark (left) must be disposed of separately from normal household waste.
Important Information Important Safeguards These safety instructions are to ensure the long life of your projector and to prevent fire and shock. Please read them carefully and heed all warnings. Installation • Do not place the projector in the following conditions: - on an unstable cart, stand, or table. - near water, baths or damp rooms. - in direct sunlight, near heaters or heat radiating appliances. - in a dusty, smoky or steamy environment. - on a sheet of paper or cloth, rugs or carpets.
Important Information Fire and Shock Precautions • Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10 cm) of space between your projector and a wall. • Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while the projector is turned on. • Prevent foreign objects such as paper clips and bits of paper from falling into your projector.
Important Information CAUTION • Always carry your projector by the carrying handle. Before doing so, be sure to lock the carrying handle in place. To lock the carrying handle, see “To lock the carrying handle” on page 6. • Do not use the tilt-foot for purposes other than originally intended. Misuses such as using the tilt foot to carry or hang (from the wall or ceiling) the projector can cause damage to the projector. • Do not send the projector in a soft case by parcel delivery service or cargo shipment.
Important Information About High Altitude mode • Set [FAN MODE] to [HIGH ALTITUDE] when using the projector at altitudes approximately 5500 feet/1600 meters or higher. Using the projector at altitudes approximately 5500 feet/1600 meters or higher without setting to [HIGH ALTITUDE] can cause the projector to overheat and the protector could shut down. If this happens, wait a couple minutes and turn on the projector.
Table of Contents Important Information. ...........................................................................................i 1. Introduction........................................................................................................... 1 What’s in the Box?.......................................................................................................... 1 Introduction to the Projector...........................................................................................
Table of Contents 7 Turning off the Projector............................................................................................... 31 8 After Use...................................................................................................................... 31 4. Convenient Features. .................................................................................... 32 1 Turning off the Image and Sound.................................................................................
Table of Contents PC Control Codes and Cable Connection.................................................................... 96 PC Control Codes................................................................................................... 96 Cable Connection................................................................................................... 97 PC Control Connector (D-SUB 9P)......................................................................... 97 8 Troubleshooting Check List.........
1. Introduction What’s in the Box? Make sure your box contains everything listed. If any pieces are missing, contact your dealer. Please save the original box and packing materials if you ever need to ship your Projector.
1. Introduction Introduction to the Projector This section introduces you to the NP3200/NP2200/NP1200 projector and describes key features and controls. Congratulations on Your Purchase of the Projector The NP3200/NP2200/NP1200 is a sophisticated XGA projector that produces an enhanced display. With the NP3200/NP2200/NP1200 you will be able to project images up to 500" (measured diagonally).
1. Introduction • A variety of input ports and a comprehensive array of system control interfaces This projector supports input signals on the following ports: BNC, DVI-D, 15pin D-Sub, composite and S-video. • Wall Color Correction Built-in Wall Color Correction presets provide for adaptive color correction when projecting onto non-white screen material (or a wall).
1. Introduction Part Names of the Projector Front/Top Lens Shift Dial (Right / Left, Up / Down) (→ page 25) Controls (→ page 7) Focus Ring (→ page 26) Remote Sensor (→ page 10) Ventilation (inlet) / Filter (→ page 77) LENS RELEASE Button (→ page 84) Built-in Security Slot ( Lens Ventilation (inlet) / Filter (→ page 77) Zoom Lever (→ page 26) Lens Cap * )* Adjustable Tilt Foot Lever (→ page 27) Adjustable Tilt Foot (→ page 27) This security slot supports the MicroSaver® Security System.
1. Introduction Bottom Anti-theft Screw for Lens (→ page 85) Carrying Handle Carrying the Projector Always carry your projector by the handle. Ensure that the power cable and any other cables connecting to video sources are disconnected before moving the projector. When moving the projector or when it is not in use, cover the lens with the lens cap. NOTE: To stand the projector on its end, do so by holding the cabinet, not by holding the carrying handle. Doing so can cause damage to the carrying handle.
1. Introduction To lock the carrying handle 1. Carefully place the projector on its end. 2. Pull up the carrying handle with the catch pressed down. 3. Press down the left and right locks to set the carrying handle in place. • To place back the carrying handle, press up the left and right locks and pull down the carrying handle.
1. Introduction Top Features 8 9 7 10 1. POWER Button ( 21, 31) 6 11 5 1 4 32 ) (ON / STAND BY) (→ page 5. SOURCE Button (→ page 23) 6. AUTO ADJUST Button (→ page 30) NOTE: To turn on the projector, press and hold this button for a minimum of 1 second. To turn off the projector, press this button twice. 7. KEYSTONE Button (→ page 28) 8. MENU Button (→ page 50) 2. POWER Indicator (→ page 21, 31, 86) 3. STATUS Indicator (→ page 21, 31, 86) 9. / Volume Buttons ( 30) 4.
1. Introduction Terminal Panel Features 10 4 5 6 3 1 7 2 8 9 The actual appearance of the terminal panel may differ slightly from that shown in the drawing, but this does not affect the projector’s performance. 1. COMPUTER 1 IN/Component Connector (Mini DSub 15 Pin) (→ page 13, 16, 17) AUDIO IN (Stereo Mini Jack) (→ page 13, 16, 17) 8. AUDIO OUT (Stereo Mini Jack) (→ page 16) 4. S-VIDEO IN Connector (Mini DIN 4 Pin) (→ page 18) 9.
1. Introduction Part Names of the Remote Control 1 3 2 7 5 6 10 12 4 8 9 11 14 15 ＋ 18 19 20 23 29 13 16 17 22 24 21 25 26 11. ID SET Button (→ page 68) 12. Numeric Keypad Button/CLEAR Button (→ page 68) 13. FREEZE Button (→ page 32) 14. AV-MUTE Button (→ page 32) 15. MENU Button (→ page 50) 16. EXIT Button (→ page 50) 27 28 17. Button (→ page 50) 18. ENTER Button (→ page 50) 19. MAGNIFY (+)(–) Button (→ page 32) 20. MOUSE L-CLICK Button* (→ page 38, 39) 21.
1. Introduction Battery Installation 1 Press firmly and slide the battery cover off. 2 Install new batteries (AAA). Ensure that you have the batteries’ polarity (+/−) aligned correctly. 3 Slip the cover back over the batteries until it snaps into place. Do not mix different types of batteries or new and old batteries.
1. Introduction Remote Control Precautions • • • • • • • • Handle the remote control carefully. If the remote control gets wet, wipe it dry immediately. Avoid excessive heat and humidity. Do not heat, take apart, or throw batteries into fire. If you will not be using the remote control for a long time, remove the batteries. Ensure that you have the batteries’ polarity (+/−) aligned correctly. Do not use new and old batteries together, or use different types of batteries together.
2. Installation and Connections This section describes how to set up your projector and how to connect PCs, video and audio sources. 1 Your projector is simple to set up and use. But before you get started, you must first: z Set up a screen and the projector. x Connect your computer or video equipment to the projector. See pages 13, 15, 16, 17, 18, 19. 3 c Connect the supplied power cable. See page 20. NOTE: Ensure that the power cable and any other cables are disconnected before moving the projector.
2. Installation and Connections Making Connections Connecting Your PC or Macintosh Computer NOTE: When using with a notebook PC, be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up.
2. Installation and Connections • Select the source name for its appropriate input connector after turning on the projector.
2. Installation and Connections When Viewing a DVI Digital Signal To project a DVI digital signal, be sure to connect the PC and the projector using a DVI-D signal cable (not supplied) before turning on your PC or projector. Turn on the projector first and select COMPUTER 3 from the source menu before turning on your PC. Failure to do so may not activate the digital output of the graphics card resulting in no picture being displayed. Should this happen, restart your PC.
2. Installation and Connections Connecting an External Monitor COMPUTER 1 IN (or COMPUTER 2 IN / COMPONENT IN) AUDIO OUT MONITOR OUT Stereo mini-plug audio cable (not supplied) Stereo mini-plug audio cable (not supplied) VGA signal cable (supplied) VGA signal cable (not supplied) AUDIO IN PHONE You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB analog or component image you’re projecting. NOTE: • Daisy chain connection is not possible.
2. Installation and Connections Connecting Your DVD Player with Component Output COMPUTER 1 IN AUDIO IN 15-pin - to - RCA (female) × 3 cable adapter (ADP-CV1E) Audio Equipment Component video RCA × 3 cable (not supplied) AUDIO IN L R DVD player L Stereo mini plug - to - RCA audio cable (not supplied) R AUDIO OUT Y Cb Cr Component TIP: A component signal will be automatically displayed. If not, from the menu, select [SETUP] → [OPTIONS(1)] → [SIGNAL SELECT] → [COMPUTER 1 (or 2)] → [COMPONENT].
2. Installation and Connections Connecting Your VCR VIDEO IN S-VIDEO IN AUDIO IN S-Video cable (not supplied) Video cable (not supplied) Audio equipment VCR S-VIDEO VIDEO VIDEO OUT L R AUDIO IN AUDIO OUT L R Audio cable (not supplied) TIP: You can connect a video cable to the “G/Y” connector of the COMPUTER 2 IN (BNC) connectors to display a VCR source. To do so, from the menu, select [SETUP] → [OPTIONS(1)] → [SIGNAL SELECT] → [COMPUTER 2] → [VIDEO].
2. Installation and Connections Connecting to a Network Example of LAN connection Example of wired LAN connection Server Hub LAN cable (not supplied) NOTE: Use a Category 5 or higher LAN cable.
2. Installation and Connections Connecting the Supplied Power Cable Connect the supplied power cable to the projector. First connect the supplied power cable’s three-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cable in the wall outlet. To wall outlet ← Make sure that the prongs are fully inserted into both the AC IN and the wall outlet. About Direct Power Off The projector has a feature called “Direct Power Off”.
3. Projecting an Image (Basic Operation) This section describes how to turn on the projector and to project a picture onto the screen. Turning on the Projector NOTE: • The projector has two power switches: a main power switch and a POWER (ON/STAND BY) button (POWER ON and OFF on the remote control). • When plugging in or unplugging the supplied power cable, make sure that the main power switch is pushed to the off () position. Failure to do so may cause damage to the projector.
3. Projecting an Image (Basic Operation) Note on Startup screen (Menu Language Select screen) When you first turn on the projector, you will get the Startup menu. This menu gives you the opportunity to select one of the 21 menu languages. To select a menu language, follow these steps: 1. Use the , H, F or E button to select one of the 21 languages from the menu. 2. Press the ENTER button to execute the selection. After this has been done, you can proceed to the menu operation.
3. Projecting an Image (Basic Operation) Selecting a Source Selecting the computer or video source NOTE: Turn on the computer or video source equipment connected to the projector. Selecting from Source List Press and quickly release the SOURCE button on the projector cabinet to display the Source list. Each time the SOURCE button is pressed, the input source will change as follows: “COMPUTER1”, “COMPUTER2”, “COMPUTER3”, “VIDEO”, “S-VIDEO”. To display the selected source, allow 1 second to elapse.
3. Projecting an Image (Basic Operation) Adjusting the Picture Size and Position Use the lens shift dials, the adjustable tilt foot levers, the zoom lever or the focus ring to adjust the picture size and position.
3. Projecting an Image (Basic Operation) Adjusting the position of a projected image • Rotate the lens shift dial. NOTE: The lens shift dial for LEFT-RIGHT cannot be rotated one-half turn or more. Do not over rotate it or it may break. NOTE: Shifting the lens to the maximum in two directions combined will cause the edges of the image to become dark or will cause some shadows. TIP: The lens shift dial for UP-DOWN can be rotated one turn or more, but not beyond the adjustable range defined below.
3. Projecting an Image (Basic Operation) Adjusting the focus (Focus ring) • Rotate the focus ring to make focus adjustment. Focus ring Finely adjusting the size of an image (Zoom lever) • Rotate the zoom lever to adjust the image size on the screen.
3. Projecting an Image (Basic Operation) Adjusting the Tilt Foot 1. Lift the front edge of the projector. CAUTION: Do not try to touch the ventilation outlet during Tilt Foot adjustment as it can become heated while the projector is turned on and after it is turned off. 2. Push up the Adjustable Tilt Foot Levers on the right and left sides of the projector to extend the adjustable tilt feet (maximum height). 3. Lower the front of the projector to the desired height.
3. Projecting an Image (Basic Operation) Correcting Keystone Distortion Correcting Keystone Distortion If the screen is tilted vertically, keystone distortion becomes large. Proceed with the following steps to correct keystone distortion ON POWER OFF AUTO ADJ. COMPUTER 1 2 VIDEO 3 S-VIDEO VIEWER 4 5 7 8 6 9 0 CLEAR ＋ ID SET AV-MUTE FREEZE MENU EXIT GE G MA NOTE: ENTER • The Keystone correction can cause an image to be slightly blurred because the correction is made electronically.
3. Projecting an Image (Basic Operation) Adjusting from the menu 1. Press the MENU button. The menu will be displayed. 2. Press the button to select [SETUP] and press the ENTER button. The [GENERAL] screen will be displayed. 3. Press the button to select [KEYSTONE]. 4. Press the or button. Adjust so that the image is rectangular. 5. After completing adjustment, press the EXIT button three times. The menu will be closed.
3. Projecting an Image (Basic Operation) Optimizing an RGB Image Automatically Adjusting the Image Using Auto Adjust Optimizing an RGB image automatically. Press the AUTO ADJUST (AUTO ADJ.) button to optimize an RGB image automatically. This adjustment may be necessary when you connect your computer for the first time. [Poor picture] [Normal picture] NOTE: • Some signals may take time to display or may not be displayed correctly.
3. Projecting an Image (Basic Operation) 7 Turning off the Projector To turn off the projector: 1. Press the POWER (ON/STAND BY) button on the projector cabinet or the POWER OFF button on the remote control. The [POWER OFF / ARE YOU SURE? / CARBON SAVINGS- SESSION 0.000[g-CO2]] message will appear. 2. Press the ENTER button or press the POWER(ON/STAND BY) or the POWER OFF button again. The lamp will turn off and the projector will go into standby mode.
4. Convenient Features 1 Turning off the Image and Sound Press the AV-MUTE button to turn off the image and sound for a short period of time. Press again to restore the image and sound. NOTE: • Even though the image is turned off, the menu still remains on the screen. • Sound from the AUDIO OUT jack (Stereo mini) can be turned off. ＋ 2 Freezing a Picture Press the FREEZE button to freeze a picture. Press again to resume motion. NOTE: The image is frozen but the original video is still playing back.
4. Convenient Features Changing Eco Mode This feature enables you to select two brightness modes of the lamp: OFF and ON modes. The lamp life can be extended by turning on the [ECO MODE]. [ECO MODE] Description Status of LAMP indicator [OFF] This is the default setting (100% Brightness). Off LAMP STATUS [ON] Select this mode to increase the lamp life (approx. 80% Brightness on NP3200 and approx. 88% Brightness on NP2200/NP1200).
4. Convenient Features 5 Checking Energy-Saving Effect [CARBON METER] This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector’s [ECO MODE] is set to [ON]. This feature is called as [CARBON METER]. (→ page 33) There are two messages: [TOTAL CARBON SAVINGS] and [CARBON SAVINGS-SESSION]. The [TOTAL CARBON SAVINGS] message shows the total amount of CO2 emission reduction from the time of shipment up to now. You can check the information on [USAGE TIME] from [INFO.
4. Convenient Features 6 Preventing the Unauthorized Use of the Projector [SECURITY] A keyword can be set for your projector using the Menu to avoid operation by an unauthorized user. When a keyword is set, turning on the projector will display the Keyword input screen. Unless the correct keyword is entered, the projector cannot project an image. • The [SECURITY] setting cannot be cancelled by using the [RESET] of the menu. To enable the Security function: 1. Press the MENU button.
4. Convenient Features 7. Type in the same combination of buttons and press the ENTER button. The confirmation screen will be displayed. 8. Select [YES] and press the ENTER button. The SECURITY function has been enabled. To turn on the projector when [SECURITY] is enabled: 1. Press and hold the POWER button for about 1 second. The projector will be turned on and display a message to the effect that the projector is locked. 2. Press the MENU button. 3.
4. Convenient Features To disable the SECURITY function: 1. Press the MENU button. The menu will be displayed. 2. Select [SETUP] → [INSTALLATION] → [SECURITY] and press the ENTER button. The OFF/ON menu will be displayed. 3. Select [OFF] and press the ENTER button. The KEYWORD CONFIRMATION screen will be displayed. 4. Type in your keyword and press the ENTER button. When the correct keyword is entered, the SECURITY function will be disabled. NOTE: If you forget your keyword, contact your dealer.
4. Convenient Features 7 Using the Optional Remote Mouse Receiver (NP01MR) The optional remote mouse receiver enables you to operate your computer’s mouse functions from the remote control. It is a great convenience for clicking through your computer-generated presentations. Connecting the remote mouse receiver to your computer If you wish to use the remote mouse function, connect the mouse receiver and computer. The mouse receiver can be connected directly to the computer’s USB port (type A).
4. Convenient Features Operating your computer’s mouse from the remote control You can operate your computer’s mouse from the remote control. PAGE / Button: Buttons: MOUSE L-CLICK Button: MOUSE R-CLICK Button: s crolls the viewing area of the window or to move to the previous or next slide in PowerPoint on your computer. moves the mouse cursor on your computer. works as the mouse left button. works as the mouse right button.
4. Convenient Features 8 Network Setting by Using an HTTP Browser Overview Connecting the projector to a network allows the Alert Mail setting (→ page 42) and the projector control from a computer via the network. To perform the projector control from a web browser, you must have an exclusive application “PC Control Utility Pro 4” installed on your computer from the supplied NEC Projector CD-ROM.
4. Convenient Features Network Settings http:// /index.html DHCP ����������������������������Enabling this option automatically assigns an IP address to the projector from your DHCP server. Disabling this option allows you to register the IP address or subnet mask number obtained from your network administrator. TIP: You can check the IP address in the menu when [ENABLE] is selected for [DHCP]. To do so, from the menu, select [INFO.] → [WIRED LAN].
4. Convenient Features Alert Mail Setting http:///lanconfig.html This option notifies your computer of an error message via e-mail when using wired LAN. An error message notification will be sent when the projector lamp has reached the end of its usable life or an error occurs in the projector. HOST NAME �����������������������������������Type in the hostname of the network connected to the projector. Up to 60 alphanumeric characters can be used.
4. Convenient Features 9 Using the VGA Signal Cable to Operate the Projector (Virtual Remote) Using the utility software “Virtual Remote Tool” included on the companion NEC Projector CD-ROM, Virtual Remote screen (or toolbar) can be displayed on your computer screen. This will help you perform operations such as projector’s power on or off and signal selection via the VGA signal cable. Virtual Remote screen Toolbar This section provides an outline of preparation for use of Virtual Remote Tool.
4. Convenient Features Install Virtual Remote Tool Preparation: Exit all running programs before installing Virtual Remote Tool. If another program is running, the installation may not be completed. To install Virtual Remote Tool, the Windows user account must have [Administrator] privilege (Windows 7, Windows Vista and Windows 2000) or [Computer Administrator] privilege (Windows XP). 1 Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive.
4. Convenient Features TIP: Uninstalling Virtual Remote Tool Preparation: Exit Virtual Remote Tool before uninstalling. To uninstall Virtual Remote Tool, the Windows user account must have “Administrator” privilege (Windows 7, Windows Vista and Windows 2000) or “Computer Administrator” privilege (Windows XP). • For Windows 7/Windows Vista 1 Click “Start” and then “Control Panel”. The Control Panel window will be displayed.
4. Convenient Features Step 3: Start Virtual Remote Tool 1 Double-click the shortcut icon on the Windows Desktop. When Virtual Remote Tool starts for the first time, “Easy Setup” window will be displayed. Follow the instructions on the screens When “Easy Setup” is completed, the Virtual Remote Tool screen will be displayed. TIP: • The Virtual Remote Tool screen (or Toolbar) can be displayed without displaying “Easy Setup” window.
4. Convenient Features Exiting Virtual Remote Tool 1 Click the Virtual Remote Tool icon on the Taskbar. The pop-up menu will be displayed. 2 Click “Exit”. The Virtual Remote Tool will be closed. Viewing the help file of Virtual Remote Tool • Displaying the help file using the taskbar 1 Click the Virtual Remote Tool icon on the taskbar when Virtual Remote Tool is running. The pop-up menu will be displayed. 2. Click “Help”. The Help screen will be displayed.
4. Convenient Features Controlling the Projector over a LAN (PC Control Utility Pro 4) Using the utility software “PC Control Utility Pro 4” included on the companion NEC Projector CD-ROM, the projector can be controlled from a computer over a LAN. Control Functions Power On/Off, signal selection, picture freeze, picture mute, audio mute, adjusting, error message notification, event schedule.
4. Convenient Features Install PC Control Utility Pro 4 Preparation: Exit all running programs before installing PC Control Utility Pro 4. If another program is running, the installation may not be completed. To install PC Control Utility Pro 4, the Windows user account must have [Administrator] privilege (Windows 7, Windows Vista and Windows 2000) or [Computer Administrator] privilege (Windows XP). 1 Insert the accompanying NEC Projector CD-ROM into your CD-ROM drive.
5. Using On-Screen Menu Using the Menus NOTE: The on-screen menu may not be displayed correctly while interlaced motion video image is projected. 1. Press the MENU button on the remote control or the projector cabinet to display the menu. NOTE: The commands such as ENTER, EXIT, , in the bottom show available buttons for your operation. 2. Press the buttons on the remote control or the projector cabinet to display the submenu. 3.
5. Using On-Screen Menu 2 Menu Elements Tab Slide bar Solid triangle Available buttons Source Highlight Radio button High Altitude symbol Thermometer symbol Key Lock symbol Off Timer remaining time Menu windows or dialog boxes typically have the following elements: Highlight �����������������������������Indicates the selected menu or item. Solid triangle ����������������������Indicates further choices are available. A highlighted triangle indicates the item is active.
5. Using On-Screen Menu 3 List of Menu Items Some menu items are not available depending on the input source.
5. Using On-Screen Menu ORIENTATION INSTALLATION CONTROL PANEL LOCK SECURITY COMMUNICATION SPEED REMOTE SENSOR CONTROL ID CONTROL ID NUMBER CONTROL ID AUTO ADJUST FAN MODE SIGNAL SELECT SETUP OPTIONS(1) COLOR SYSTEM OPTIONS(2) INFO.
5. Using On-Screen Menu 4 Menu Descriptions & Functions [SOURCE] COMPUTER1 Selects the computer connected to your COMPUTER 1 IN input connector. NOTE: • When the component input signal is connected to the COMPUTER 1 IN connector, select [COMPUTER1]. • The projector will determine if the input signal is RGB or component signal. COMPUTER2 Selects the computer connected to your COMPUTER 2 IN connectors (BNC × 5).
5. Using On-Screen Menu 5 Menu Descriptions & Functions [ADJUST] [PICTURE] [PRESET] This function allows you to select optimized settings for your projected image. You can adjust neutral tint for yellow, cyan or magenta. There are six factory presets optimized for various types of images. You can also use [DETAIL SETTINGS] to set user adjustable settings to customize each gamma or color. Your settings can be stored in [PRESET 1] to [PRESET 6].
5. Using On-Screen Menu [GENERAL] Storing Your Customized Settings [REFERENCE] This function allows you to store your customized settings in [PRESET 1] to [PRESET 6]. First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERATURE]. HIGH-BRIGHT �������� Recommended for use in a brightly lit room. PRESENTATION ����� Recommended for making a presentation using a PowerPoint file. VIDEO �������������������� Recommended for typical TV program viewing.
5. Using On-Screen Menu [RESET] The settings and adjustments for [CONTRAST], [BRIGHTNESS], [SHARPNESS], [COLOR], [HUE], and [REFERENCE] within [PRESET] will be returned to the factory settings. The settings and adjustments under [DETAIL SETTINGS] within the [PRESET] screen that are not currently selected will not be reset.
5. Using On-Screen Menu [IMAGE OPTIONS] Adjusting Clock and Phase [CLOCK/PHASE] This allows you to manually adjust CLOCK and PHASE. CLOCK ������������������� Use this item to fine tune the computer image or to remove any vertical banding that might appear. This function adjusts the clock frequencies that eliminate the horizontal banding in the image. This adjustment may be necessary when you connect your computer for the first time.
5. Using On-Screen Menu Adjusting Horizontal/Vertical Position [HORIZONTAL/VERTICAL] Adjusts the image location horizontally and vertically. - An image can be distorted during the adjustment of [CLOCK] and [PHASE]. This is not malfunction. - The adjustments for [CLOCK], [PHASE], [HORIZONTAL], and [VERTICAL] will be stored in memory for the current signal. The next time you project the signal with the same resolution, horizontal and vertical frequency, its adjustments will be called up and applied.
5. Using On-Screen Menu Selecting Aspect Ratio [ASPECT RATIO] The term “aspect ratio” refers to the ratio of width to height of a projected image. The projector automatically determines the incoming signal and displays it in its appropriate aspect ratio. • This table shows typical resolutions and aspect ratios that most computers support.
5. Using On-Screen Menu Sample image when the appropriate aspect ratio is automatically determined [Computer signal] Aspect ratio of incoming signal 4:3 5:4 4:3 Letterbox 16:9 15:9 16:10 Sample image when the appropriate aspect ratio is automatically determined [Video signal] Aspect ratio of incoming signal Sample image when the aspect ratio is automatically determined Squeeze NOTE: To display a squeezed signal properly, select [16:9] or [WIDE ZOOM].
5. Using On-Screen Menu [AUDIO] Controlling Sound [VOLUME/BASS/TREBLE/BALANCE] Adjusts the volume, bass and treble level, left and right balance of the projector speaker and AUDIO OUT (Stereo Mini Jack). TIP: [VOLUME] • When no menus appear, the and buttons on the projector cabinet and the VOL. +/− buttons work as a volume control.
5. Using On-Screen Menu 6 Menu Descriptions & Functions [SETUP] [GENERAL] Correcting Vertical Keystone Distortion Manually [KEYSTONE] You can correct vertical distortion manually. (→ page 28) TIP: When this option is highlighted, pressing the ENTER button will display its slide bar for adjustment. Saving Vertical Keystone Correction [KEYSTONE SAVE] This option enables you to save your current keystone settings. OFF ������������������������ Does not save current keystone correction settings.
5. Using On-Screen Menu Using the Wall Color Correction [WALL COLOR] This function allows for quick adaptive color correction in applications where the screen material is not white. NOTE: Selecting [WHITEBOARD] reduces lamp brightness. Setting Eco Mode [ECO MODE] This feature turns on or off the ECO mode. The lamp life can be extended by selecting [ON]. Selecting [ON] also decreases fan noise when compared to [OFF] mode.
5. Using On-Screen Menu Setting Closed Caption [CLOSED CAPTION] This option sets several closed caption modes that allow text to be superimposed on the projected image of Video or S-Video. OFF ������������������������ This exits the closed caption mode. CAPTION 1-4 ��������� Text is superimposed. TEXT 1-4 ���������������� Text is displayed. NOTE: • The closed caption is not available under the following conditions: - when messages or menus are displayed. - when an image is magnified, frozen, or muted.
5. Using On-Screen Menu Turning On / Off Eco Message [ECO MESSAGE] This option turns on or off the following messages when the projector is turned on. The Eco Message prompts the user to save energy. When [OFF] is selected for [ECO MODE], you will get a message to prompt you to select [ON] for [ECO MODE]. When [ON] is selected for [ECO MODE] To close the message, press any one of the buttons. The message will disappear if no button operation is done for 30 seconds.
5. Using On-Screen Menu [INSTALLATION] Selecting Projector Orientation [ORIENTATION] This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection, desktop rear projection, and ceiling front projection. DESKTOP FRONT CEILING REAR DESKTOP REAR CEILING FRONT Disabling the Cabinet Buttons [CONTROL PANEL LOCK] This option turns on or off the CONTROL PANEL LOCK function. NOTE: • This CONTROL PANEL LOCK does not affect the remote control functions.
5. Using On-Screen Menu Selecting Communication Speed [COMMUNICATION SPEED] This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 19200 bps. The default is 19200 bps. Select the appropriate baud rate for your equipment to be connected (depending on the equipment, a lower baud rate may be recommended for long cable runs). NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu.
5. Using On-Screen Menu 4. Release the ID SET button. The updated CONTROL ID screen will be displayed. NOTE: • The IDs can be cleared in a few days after the batteries are run down or removed. • Accidentally pressing any one of the buttons of the remote control will clear currently specified ID with batteries removed.
5. Using On-Screen Menu [OPTIONS(1)] Setting Auto Adjust [AUTO ADJUST] This feature sets the Auto Adjust mode so that the computer signal can be automatically or manually adjusted for noise and stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE]. OFF ������������������������ The computer signal will not be automatically adjusted. You can manually optimize the computer signal. NORMAL���������������� Default setting. The computer signal will be automatically adjusted.
5. Using On-Screen Menu Selecting Signal Format [SIGNAL SELECT] [COMPUTER1], [COMPUTER2] Allows you to set [COMPUTER1] and [COMPUTER2] to automatically detect an incoming RGB or component source such as a computer or DVD player. However there may be some RGB and component signals that the projector is unable to detect. In this case, select [RGB] or [COMPONENT]. NOTE ([COMPUTER 2] only): When using the "G/Y" connector of the COMPUTER 2 IN connectors to display a Video signal, select [VIDEO].
5. Using On-Screen Menu [OPTIONS(2)] Using Off Timer [OFF TIMER] 1. Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00. 2. Press the ENTER button on the remote control. 3. The remaining time starts counting down. 4. The projector will turn off after the countdown is complete. NOTE: • To cancel the preset time, set [OFF] for the preset time or turn off the power.
5. Using On-Screen Menu Turning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP1/2)] When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER1 IN or COMPUTER2 IN input will power on the projector and simultaneously project the computer’s image. This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet to power on the projector.
5. Using On-Screen Menu 7 Menu Descriptions & Functions [INFO.] Displays the status of the current signal and lamp usage. This item has four pages. TIP: Pressing the HELP button on the remote control will show the [INFO.] menu items. The information included is as follows: [USAGE TIME] [LAMP LIFE REMAINING] (%)* [LAMP HOURS USED] (H) [FILTER HOURS USED] (H) [TOTAL CARBON SAVINGS] (kg-CO2) * The progress indicator shows the percentage of remaining bulb life.
5.
5. Using On-Screen Menu 8 Menu Descriptions & Functions [RESET] Returning to Factory Default [RESET] The RESET feature allows you to change adjustments and settings to the factory preset for a (all) source (s) except the following: [CURRENT SIGNAL] Resets the adjustments for the current signal to the factory preset levels. The items that can be reset are: [PRESET], [CONTRAST], [BRIGHTNESS], [SHARPNESS], [COLOR], [HUE], [CLOCK], [PHASE], [HORIZONTAL], [VERTICAL], [OVERSCAN], and [ASPECT RATIO].
6. Maintenance This section describes the simple maintenance procedures you should follow to clean the filters and replace the lamp. Cleaning or Replacing the Filter The air-filter sponge keeps dust and dirt from getting inside the projector and should be frequently cleaned. If the filter is dirty or clogged, your projector may overheat. NOTE: The message for filter cleaning will be displayed for one minute when the projector is turned on or off.
6. Maintenance 2. Gently peel off the filter (sponge) and replace it with the new one. 3. Reinstall the filter cover. • Slip the filter cover back until it snaps into place. 4. Connect the supplied power cable, turn on the Main Power switch and turn on the projector. 5. Finally, select the menu → [RESET] → [CLEAR FILTER HOURS] to reset the filter usage hours. (→ page 76 for resetting the filter usage time) Cleaning the Cabinet and the Lens 1. Turn off the projector before cleaning. 2.
6. Maintenance Replacing the Lamp When the lamp reaches the end of its life, the LAMP indicator in the cabinet will blink red. Even though the lamp may still be working, replace the lamp to maintain the optimal projector performance. After replacing the lamp, be sure to clear the lamp hour meter. (→ page 76) CAUTION • DO NOT TOUCH THE LAMP immediately after it has been used. It will be extremely hot. Turn the projector off, turn off the main power switch and then disconnect the power cable.
6. Maintenance 2. Loosen the two screws securing the lamp housing until the phillips screwdriver goes into a freewheeling condition. The two screws are not removable. Remove the lamp housing by holding it. Interlock NOTE: There is an interlock on this case to prevent the risk of electrical shock. Do not attempt to circumvent this interlock. 3. Insert a new lamp housing until the lamp housing is plugged into the socket. CAUTION Do not use a lamp other than the NEC replacement lamp NP06LP.
6. Maintenance 4. Reattach the lamp cover. Slip the lamp cover back until it snaps into place. 1 2 5. Connect the supplied power cable, turn on the Main Power switch and turn on the projector. 6. Finally, select the menu → [RESET] → [CLEAR LAMP HOURS] to reset the lamp life remaining and lamp usage hours. NOTE: When you continue to use the projector for another 100 hours after the lamp has reached the end of its life, the projector cannot turn on and the menu is not displayed.
7. Using Optional Lenses Five optional lenses are available for the NP3200/NP2200/NP1200. See the information described on this page to buy the appropriate lens for your screen size and throw distance. See page 84 for installing the lens. Table of Throw Distances and Screen Sizes for Optional Lenses [NP3200/NP2200/NP1200] Screen Size 30" 40" 60" 67" 72" 80" 84" 90" 100" 120" 150" 180" 200" 210" 240" 250" 270" 300" 400" 500" STANDARD 1.5 − 2.0 (m) (inches) 0.89 – 1.20 35.1 – 47.3 1.20 – 1.62 47.4 – 63.
7. Using Optional Lenses Lens Shift Adjustable Range The top right diagram shows the location of the image position in the lens. The lens can be shifted within the shaded area as shown using the normal projection position as a starting point. The projector has a lens shift feature that allows you to move the image vertically or horizontally. NOTE: Lens shift is not available with the NP01FL optional lens. The NP01FL should be used only for “zero degree” applications.
7. Using Optional Lenses Replacing with Optional Lens CAUTION • Do not give a shock or excessive load to the projector or the lens components as the projector and lens components contain precision parts. • When shipping the projector with the optional lens, remove the optional lens before shipping the projector. The lens and the lens shift mechanism may encounter damage caused by improper handling during transportation.
7. Using Optional Lenses Install the new lens 1. Insert the lens with the yellow protrusion on top. Yellow Protrusion 2. Rotate the lens clockwise. Rotate the lens until you feel it click into place. Using the anti-theft screw to prevent theft of the lens Tighten the supplied anti-theft screw on the front bottom.
8. Appendix Troubleshooting This section helps you resolve problems you may encounter while setting up or using the projector. Indicator Messages POWER Indicator Indicator Condition Off Blinking light Steady light Projector Condition Note The main power is off – 0.5 sec On, 0.5 sec Off The projector is getting ready to turn on. Wait for a moment. 2.5 sec On, 0.5 sec Off Off Timer is enabled. – Green The projector is turned on.
8. Appendix Common Problems & Solutions (→ “POWER/STATUS/LAMP Indicator” on page 86) Problem Check These Items Does not turn on or shut down • Check that the power cable is plugged in and that the power button on the projector cabinet or the remote control is on. (→ pages 20, 21) • Ensure that the lamp cover is installed correctly. (→ page 81) • Check to see if the projector has overheated.
8. Appendix If there is no picture, or the picture is not displayed correctly. • Power on process for the projector and the PC. Be sure to connect the projector and notebook PC while the projector is in standby mode and before turning on the power to the notebook PC. In most cases the output signal from the notebook PC is not turned on unless connected to the projector before being powered up.
8. Appendix Specifications This section provides technical information about the projector’s performance. Model Number NP3200/NP2200/NP1200 Optical LCD Panel NP3200/NP2200/NP1200: 0.8" p-Si TFT active-matrix with Micro Lens Array (Aspect ratio 4:3) Resolution NP3200/NP2200/NP1200: 1024 × 768 pixels*¹ up to UXGA with scaling technology (up to SXGA+ @ 60 Hz on DVI-D) Standard Lens Manual zoom and focus: F1.7–2.2 f=24.4–32.
8. Appendix Power Consumption Mechanical Installation Dimensions Weight Environmental Considerations Operational Temperatures : Storage Temperatures : Regulations NP3200: 428W(100-130V AC)/412W(200-240V AC) in OFF for ECO MODE/345W(100-130V AC)/334W(200-240V AC) in ON for ECO MODE NP2200/NP1200: 396W(100-130V AC)/381W(200-240V AC) in OFF for ECO MODE/345W(100-130V AC)/334W(200-240V AC) in ON for ECO MODE NP3200/NP2200/NP1200: 12W(100-130V AC)/13W(200-240V AC) in NORMAL Mode for STANDBY MODE/0.
8. Appendix 4.7/0.19" 358/14.1" Cabinet Dimensions 168.3/6.63" ス゛ ーム 150.5/5.9" 399/15.
8. Appendix Screen Size and Projection Distance This section should be used when considering the distance to the screen and the screen size. The following is an example of when the standard lens is used. [NP3200/NP2200/NP1200] Available projection distances are 1.0 m/41.2 inches for 30" screen to 18 m/718 inches for 500" screen, according to the chart.
8. Appendix List of Screen Sizes [NP3200/NP2200/NP1200] List of Screen Sizes Height Screen size Screen size (Diagonal) Width 30" 40" 60" 80" 100" 120" 150" 200" 250" 300" 400" 500" m 0.6 0.8 1.2 1.6 2.0 2.4 3.0 4.1 5.1 6.1 8.1 10.2 Width (H) inch 24.0 31.5 47.2 63.0 78.7 94.5 118.1 161.4 200.8 240.2 318.9 401.6 m 0.46 0.6 0.9 1.2 1.5 1.8 2.3 3.0 3.8 4.6 6.1 7.6 Height (V) inch 18.0 23.6 35.4 47.2 59.1 70.9 90.6 118.1 149.6 181.1 240.2 299.2 Formulas: Screen width H (m)=Screen size x 4/5 x 0.
8. Appendix Pin Assignments of D-Sub COMPUTER 1 Input Connector Mini D-Sub 15 Pin Connector 5 4 3 2 1 10 9 8 7 6 15 14 13 12 11 Pin No. Signal Level Video signal : 0.
8.
8.
8. Appendix Cable Connection Communication Protocol Baud rate........................................... 19200 bps Data length........................................ 8 bits Parity................................................. No parity Stop bit............................................. One bit X on/off............................................. None Communications procedure.............. Full duplex NOTE: Depending on the equipment, a lower baud rate may be recommended for long cable runs.
8. Appendix 8 Troubleshooting Check List Before contacting your dealer or service personnel, check the following list to be sure repairs are needed also by referring to the “Troubleshooting” section in your user’s manual. This checklist below will help us solve your problem more efficiently. * Print this page and the next page for your check.
8. Appendix In the space below please describe your problem in detail. Information on application and environment where your projector is used Projector Installation environment Model number: Screen size: Serial No.
8. Appendix 9 TravelCare Guide 5) Problems or damage caused by use in hot or humid places, in vehicles, boats or ships, etc. TravelCare - a service for international travelers 6) Problems or damage caused by expendable supplies or devices connected to the product other than those designated by NEC. This product is eligible for “TravelCare”, NEC’s unique international warranty. Please note that TravelCare coverage differs in part from coverage under the warranty included with the product.
8. Appendix Visual Group Ltd. Address: Telephone: Fax Line: Email Address: NEC Corporation of Malaysia Sdn. Bhd. Address: 33rd Floor, Menara TA One, 22, Jalan P. Ramlee, 50250 Kuala Lumpur, Malaysia Telephone: +6 03 2178 3600 (ISDN) Fax Line: +6 03 2178 3789 Email Address: necare@nsm.nec.co.jp WEB Address: http://www.necarecenter.com 28 Walls Road Penrose Auckland New Zealand 095250740 095809607 sarah.reed@visualgroup.co.
8. Appendix P-1/ , Date: / / , TO: NEC or NEC’s Authorized Service Station: FM: (Company & Name with signature) Dear Sir (s), I would like to apply your TravelCare Service Program based on attached registration and qualification sheet and agree with your following conditions, and also the Service fee will be charged to my credit card account, if I don’t return the Loan units within the specified period. I also confirm following information is correct. Regards.
8. Appendix Condition of your TravelCare Service Program 5. Loan Service Charges and Conditions: Upon acceptance of this NEC Projector, Customer agrees to assume liability for this loan unit. Enduser is requested to understand following condition of TravelCare Service Program and complete the necessary information on the application sheet. The current cost of use of this loan unit is $200.00 USD for 12 calendar days.
© NEC Display Solutions, Ltd.
