Operation Manual

59
... English
Appendices
Problem: Message Reminders

Over temperature - the projector has exceeded its recommended
operating temperature and must be allowed to cool down before it
may be used.

Replacing the lamp - the lamp is about to reach its maximum life-
time. Prepare to replace it soon.
NOTE: When you continue to use the projector for another 100
hours after the lamp has reached the end of its life, the projector
cannot turn on.
If this happens, after replacing the lamp, connect the power cord
and then press the HELP button on the remote control. This will
allow you to turn on the projector. Clear the lamp hours by select-
ing “OPTIONS” -> “Lamp/Filter Settings” -> “Clear Lamp Usage
Hours” from the menu.

Fan failed - the system fan is not working.

Cleaning the lter