Operation Manual

61
... English
Appendices
Replacing Procedure:
1. Turn off the projector and disconnect the power cord.
2. Open the lter cover on the left side of the projector.
u
3. Pull the lter from the lter cover.
v
4. Replace the lter.
Note:
The lter has outside and inside. The lter cover with the lter
in the opposite way cannot be attached to the projector. Attach
the lter to the lter cover with a square mark (□) at the top left
corner as shown in the drawing.
To replace the lter
CAUTION:
• Before replacing the lter, remove dust and dirt from the projector cabinet.
• The projector contains high-precision parts. Keep out dust and dirt during lter
replacement.
• Do not wash the lter with water. Water will damage the lter membrane.
•
Reattach the lter cover correctly. Failure to do so may cause projector malfunction.
1
2