Operation Manual

1. Introduction

Terminal Panel Features

1. COMPUTER1IN/ComponentInputConnector(MiniD-Sub15Pin)(→page13, 143, 148)

2. COMPUTER1AUDIOINMiniJack(StereoMini)(→page143, 148)

3. COMPUTER2IN/ComponentInputConnector(MiniD-Sub15Pin)(→page143, 148)

4. COMPUTER2AUDIOINMiniJack(StereoMini)(→page145)

5. COMPUTER3IN/Component(R/Cr,G/Y,B/Cb,H,V)Connectors(BNC×5)(→page143, 148)

6. COMPUTER3AUDIOINMiniJack(StereoMini)(→page143, 148)

7. HDMIINConnector(TypeA)(→page144, 145, 149)

8. DisplayPort IN Connector (→page144)

9. MONITOROUT(COMP.1)Connector(MiniD-Sub15Pin)(→page146)

10.AUDIOOUTMiniJack(StereoMini)(→page146)

11.S-VIDEOINConnector(MiniDIN4Pin)(→page147)

12.VIDEOINConnector(RCA)(→page147)

13.VIDEO/S-VIDEOAUDIOINL/MONO,R(RCA)(→page147)

14.LANPort(RJ-45)(→page150)

15.USBPort(TypeA)(→page60)

16.PCCONTROLPort(D-Sub9Pin)(→page219)

 UsethisporttoconnectaPCorcontrolsystem.Thisenablesyoutocontroltheprojectorusingserialcommunica-

tionprotocol.Ifyouarewritingyourownprogram,typicalPCcontrolcodesareonpage219.

17.REMOTEConnector(StereoMini)

 UsethisconnectorforwiredremotecontroloftheprojectorusingtheNECoptionalremotecontrol.

 Connecttheprojectorandoptionalremotecontrolusingacommerciallyavailablewiredremotecontrolcable.

NOTE: When a remote control cable is connected to the REMOTE connector, infrared remote control operations cannot be

performed.

14 78 15 12 34

5109131211