Operation Manual

142
4.Turnthelensclockwise.
Turn until a click is heard.
The lens is now fastened onto the projector.
TIP:Mountingthelenstheftpreventionscrew
Fastenthelenstheftpreventionscrewincludedwiththeprojectortothe
bottomoftheprojectorsothatthelenscannotberemovedeasily.
Removing the lens
1. While pressing the lens release button on the
projector’s front panel fully in, turn the lens
counterclockwise.
The lens comes off.
NOTE: If the lens cannot be removed when the lens release
buttonispressed,checkwhetherthelenstheftpreventionscrew
ismounted.
2. Slowlypullthelensofftheprojector.
- After removing the lens, mount the lens caps (front
and back) included with the lens before storing the
lens.
- If no lens is going to be mounted on the projector,
mount the dust cap included with the projector.