Operation Manual

4. Using On-Screen Menu

[OPTIONS(1)]

SelectingFanMode[FANMODE]

FanModeisusedtosetthespeedoftheinternalcoolingfan.

AUTO �� The built-in fans automatically run at a variable speed according to the internal temperature�

HIGH �� The built-in fans run at a high speed� Select this option when using the projector at altitudes approximately

5500 feet/1700 meters or higher�

NOTE:

• ItisrecommendedthatyouselectHighspeedmodeifyouusetheprojectornon-stopforconsecutivedays.

• Set[FANMODE]to[HIGH]whenusingtheprojectorataltitudesapproximately5500feet/1700metersorhigher.

• Usingtheprojectorataltitudesapproximately5500feet/1700metersorhigherwithoutsettingto[HIGH]cancausetheprojector

tooverheatandtheprotectorcouldshutdown.Ifthishappens,waitacoupleminutesandturnontheprojector.

• Usingtheprojectorataltitudesapproximately5500feet/1700metersorhighercanshortenthelifeofopticalcomponentssuch

asthelightmodule.

• Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.

EnablingorDisablingWXGAMode[WXGAMODE]

Selecting[ON]willgiveprioritytoWXGA(1280×768)/WUXGA(1920×1200)signalsinrecognizinganinputsignal.

When[WXGAMODE]issetto[ON],XGA(1024×768)/UXGA(1600×1200)signalsmaynotberecognized.Inthis

case,select[OFF].

NOTE:

• The[ON]isselectedatthetimeofshipment.

SelectingStillImageModeorMovieMode[IMAGEMODE]

Thisfunctionallowsyoutoselectthestillimagemodeorthemoviemode.

NOTE:

• Thismodemaynotbeavailabledependingoninputsignal.