Operation Manual

4. Using On-Screen Menu

UsingTestPattern[TESTPATTERN]

Displaysthetestpatternforadjustingdistortiononthescreenandthefocusatthetimeoftheprojectorsetup.Once

the[TESTPATTERN]ontheonscreenmenuisselected,thepatternforadjustmentwillbedisplayedon.Ifyound

distortiononthepattern,adjusttheprojectorinstallationangleorcorrectdistortionbypressingtheKEYSTONEbutton

ontheremote.Ifthefocusadjustmentisrequired,controlthefocuslever.Recommendtoperformthefocusadjustment

afterleavingtheprojectorunderthestatetheTESTPATTERNhasbeenprojectedforover30minutes.PressEXIT

button to close the test pattern and return to the menu.

Settingthenetwork[NETWORKSETTINGS]

Thisfunctiondisplaythenetworksettingsmenu.(→page90)