Operation Manual

50
4. Using On-Screen Menu
❺ Menu Descriptions & Functions [SETUP]
[GENERAL]
CorrectingKeystoneDistortionManually[KEYSTONE]
Youcancorrecthorizontalorverticalkeystonemanually.[HORIZONTAL]and[VERTICAL](simultaneouslyadjustable)
correction can be selected.
NOTE:
• Someitemsarenotavailablewhenoneitemisactivated.Unavailableitemsareshowningrey.
• Tochangefromoneitemtoanotheritem,resettherstitem.
• Adjustmentvalueswillbeoverwritten.Theywillnotbedeletedevenwhentheprojectoristurnedoff.
• Using[KEYSTONE]correctioncancausetheimagetobeslightlyblurredbecausethecorrectionismadeelectronically.
HORIZONTAL ��������� Corrects horizontal keystone distortion� (→ page 21)
VERTICAL
�������������� Corrects vertical keystone distortion� (→ page 21)
RESET
�������������������� Returns all the above items to the factory preset values�
TIP:
• Themaximumadjustmentrangewith[KEYSTONE]correctionis±25°inthehorizontaldirection,±30°intheverticaldirection.
- Dependingoninputsignal,theadjustablerangemaybenarrower.