Operation Manual

4. Using On-Screen Menu

AdjustingHorizontal/VerticalPosition[HORIZONTAL/VERTICAL]

Adjuststheimagelocationhorizontallyandvertically.

- Animagecanbedistortedduringtheadjustmentof[CLOCK]and[PHASE].Thisisnotmalfunction.

- The adjustmentsfor[CLOCK],[PHASE],[HORIZONTAL],and[VERTICAL]willbestoredinmemoryforthe

currentsignal.Thenexttimeyouprojectthesignalwiththesameresolution,horizontalandverticalfrequency,

its adjustments will be called up and applied.

 Todeleteadjustmentsstoredinmemory,fromthemenu,youselect[RESET]→[CURRENTSIGNAL]or[ALL

DATA]andresettheadjustments.

SelectingOverscanPercentage[OVERSCAN]

Thisallowsyoutosettheappropriateoverscanforanincomingsignal.

AUTO �� Display an appropriately overscanned image (factory setting)�

OFF �� Does not overscan the image�

ON �� Overscans the image�

Projected image

Overscaned by 10%

NOTE:

• The[OVERSCAN]itemcannotbeselectedwhenVIDEOsignalsareusedorwhen[NATIVE]isselectedfor[ASPECTRATIO].