Operation Manual
41
4. Using On-Screen Menu
Menu Item Default Options
INFO� USAGE TIME (B) LIGHT HOURS USED
TOTAL CARBON SAVINGS
SOURCE(1) (B) RESOLUTION
HORIZONTAL FREQUENCY
VERTICAL FREQUENCY
SYNC TYPE SEPARATE SYNC, COMPOSITE SYNC, SYNC ON GREEN, SYNC ON
VIDEO
SYNC POLARITY
SCAN TYPE INTERLACE, NON-INTERLACE
SOURCE(2) (B) SIGNAL TYPE RGB, VIDEO, YCbCr
VIDEO TYPE
NTSC, NTSC3�58, NTSC4�43, PAL, PAL-M, PAL-N, PAL60, SECAM
BIT DEPTH 8[bits], 10[bits], 12[bits]
VIDEO LEVEL FULL, ENHANCED, DEFAULT
3D SIGNAL SUPPORTED, NOT SUPPORTED
HDBaseT SIGNAL QUALITY NORMAL, WARNING, ABNORMAL
OPERATION MODE HDBaseT, ETHERNET, LOW POWER, DISCONNECT
LINK STATUS NO LINK, HDBaseT, LOW POWER, ETHERNET
HDMI STATUS NO HDMI, HDMI ON, HDCP ON
WIRED LAN IP ADDRESS
SUBNET MASK
GATEWAY
MAC ADDRESS
WIRELESS LAN IP ADDRESS
SUBNET MASK
GATEWAY
MAC ADDRESS
SSID
NETWORK TYPE
SECURITY
CHANNEL
SIGNAL LEVEL
VERSION(1) (B) FIRMWARE
DATA
VERSION(2) (B) FIRMWARE2
OTHERS (B) PROJECTOR NAME (B)
HOST NAME (B)
MODEL NO� (B)
SERIAL NUMBER (B)
LAN UNIT TYPE
CONTROL ID (when [CONTROL ID] is set) (B)
RESET CURRENT SIGNAL
ALL DATA
* Theasterisk(*)indicatesthatthedefaultsettingvariesdependingonthesignal.