Operation Manual
28
3. Convenient Features
❹ Changing Eco Mode/Checking Energy-Saving Effect
Using Eco Mode [ECO MODE]
Whenthe[LIGHTMODE]’s[ECOMODE]issetto[ECO1]or[ECO2],thebrightnessandtheoperatingsoundare
reduced.Furthermore,thepowerconsumptionisdecreasedandtheprojector’sCO
2
emissions are reduced.
[ECOMODE] Iconatthebot-
tom of the menu
Description StatusofLIGHTindicator
[OFF] 100%brightness
Thescreenwillbebrightlylit.
Off
[ECO1] Brightnesswillbeatabout80%.
The cooling fanwill also slow down ac-
cordingly.
Lower power consumption
SteadyGreen
light
[ECO2]
Brightnesswillbeatabout50%.
The cooling fanwill also slow down ac-
cordingly.
Lower power consumption considerably
Toturnonthe[ECOMODE],dothefollowing:
1. PresstheECOButtonontheremotecontroltodisplay[ECOMODE]screen.
2. Use the ▼▲ buttons to select, then press the ENTER button.
The [ECO MODE] selection screen turns off and the projector switches to the selected mode.
• Wheninthe[ECOMODE],theLIGHTindicatorlightsgreen.
NOTE:
• The[ECOMODE]canbechangedbyusingthemenu.
Select[SETUP]→[GENERAL]→[LIGHTMODE]→[ECOMODE].
• The[LIGHTHOURSUSED]canbecheckedin[USAGETIME].Select[INFO.]→[USAGETIME].
• Afteralapseof1minutefromwhentheprojectordisplaysno-signalguidance,ablue,blackorlogoscreen,theprojectorgoes
into[ECO2]automatically.Theprojectorwillreturntoitsoriginalsettingonceasignalisaccepted.
• Iftheprojectorinsidetemperaturebecomeshighcausedonthehighroomtemperature,theprojectormaydecreasethebrightness
temporarilyforprotectingitself.Thisisaprotectivefunctioncalled[FORCEDECOMODE].Whentheprojectorisinthe[FORCED
ECOMODE],thethermometersymbol[ ]isindicatedattherightbottomofthescreen.Whentheprojectorinsidetemperature
goesdownbycoolingtheroomorsettingthefanmodeto[HIGH],the[FORCEDECOMODE]willbereleasedandtheprojector
willbebacktotheoriginalsettingstate.Duringthe[FORCEDECOMODE],itdisablestochangethestatebychangingthesetting
ofthe[ECOMODE].










