User's Manual

26
5. Performing Stacking/Tiling Correction
1. Start the Multi Screen Tool
2. S
elect the Projectors
Select [Communication Settings] of the [Op-
tions] menu, then
select the network type,
enter a check mark for the projectors that
will be used, click [Connect], and add to the
list.
* Up to four projectors can be used for stacking/
tiling corre
ction.
Preparations: Connect the web camera
to a computer on which the Multi
Scre
en Tool and the web camera's utility
software
are installed, then connect
the computer to the same LAN as the
pro
jectors.
Connection of the Equipment Page 13
To the USB port of the computer
When using the web camera
3. Select [Use the camera] in Camera
Settings
Select [Camera Settings] in the [Options]
menu
, and click [OK] after selecting [Use
the camera
].