User's Manual

18
❸
Calibration
Mode
Sta
cking
Master Projector:
Theprojectorthatwillserveasthemasterisdetermined,andtheprojectionimage
of another projector undergoes stacking correction so that it is in agreement with the
projection image of the master projector.
Inthisinstance,the[GEOMETRICCORRECTION] ofthemasterprojectordoesnot
change.
Auto:
When there is a screen frame, the projection image is corrected so as to fit inside that
frame.
When there is no frame, correction is applied so that the area of the rectangle is
maximizedwithinthesuperimposedportionoftheprojectionarea.
Theaspectratiooftheinputsignalisnotmaintainedatthistime.
Tiling
Specify Four Points:
On the web camera's captured images, set points at the four corners of the
image for tiling pro
jection and correct to fit within this range.
Auto:
When t
he screen has a frame, the projected image is corrected so as to fit inside
that frame.
When t
here is no frame, correction is applied so that the area of the rectangle is
maximized within the pro
jection range.
The aspect ratio of the input signal is not maintained at this time.
❹
[Next]
Display the calibration screen when using the camera. ( Page20)
When not using the camera, display the calibration screen during stacking correction,
and the layout configuration screen during tiling correction.
❺
[Exit]
ClosestheMultiScreenTool.
3. Multi Screen Tool Settings