User's Manual

CHAPTER 2 NDA-24318
Page 10
Issue 1
CIRCUIT CARD EXPLANATIONS
2.3 Face Layout of Lamps, Switches and Connectors
The face layout of lamps, switches and connectors on this circuit card are shown below. For more detailed
information, see Section 2.6 External Interfaces.
Figure 2-4 Face Layout of PA-8IPTB IPTRK Circuit Card
Note:
When mounting the optional sub board (PZ-8VCTB), be sure to use SUB3A and SUB3B connectors.
2.4 Lamp Indications
Lamp indication meanings are shown below:
Table 2-1 Lamp Indication Meanings
LAMP NAME COLOR MEANING OF INDICATION
OPE Green Lights when circuit card is operating normally.
BUSY Green Lights when one or more lines are busy.
SUBOPE3 Green Lights when Sub CPU #3 is in operation.
SUBOPE2 Green Lights when Sub CPU #2 is in operation.
SUBOPE1 Green Lights when Sub CPU #1 is in operation.
SUBOPE0 Green Lights when CPU of IPTRK circuit card’s main board is in operation.
L3 Green Not used.
L2 Green Not used.
L1 Green Lights when CCIS/FCCS link is established.
IP-LRR Green Lights when this card is used with IP network.
12345678
SUBOPE3
SUBOPE2
SUBOPE1
SUBOPE0
BUSY
L3
L2
L1
IP-TXRX
IP-100M
F-TXRX
F-100M
IP-LRR
IP-LINK
IP-COL
F-LRR
F-LINK
F-COL
SW10
12345678
SW40
12345678
SW20
12345678
SW50
12345678
SW30
12345678
SW60
OPE
MODE
IPCON
FCON
MB
MBR
SUB3A SUB3B