DV130PD_AA2ANN_ENG DVD PLAYER OWNER’S MANUAL MODEL : NDV-28 Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION concerning the Power Cord CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 .4 .4 .4 .4 .4 .4 .5 .5 .6 .7 .7 .7 Installation and Setup . . . . . . . . .8-13 Setting up the Player . . . . . . . . . . . . . . . . . . . .8 DVD Player Connections . . . . . . . . . . . . . . . . .8 Video and Audio Connections to Your TV . . .8 Audio Connection to Optional Equipment . . .9 Displaying Disc Information on-screen . . . .10 Initial Settings . . . . . . . . . . . . . . . .
Introduction To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your DVD player. Should the unit require service, contact an authorized service location. About the Cleaning Discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.
In addition, this unit plays DVD±R/RW and CD-R/RW that contains audio titles, MP3, WMA, and/or JPEG files. Notes: • Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some CD-R/RW (or DVD±R/RW) discs cannot be played on the unit. • Do not use irregularly shaped CDs (e.g., heartshaped or octagonal) since they may result in malfunctions.
Front Panel a b c d e f a POWER Switches the unit ON and OFF. f Remote Sensor Point the remote control here. b N (PLAY) Starts playback. g Display window Shows the current status of the unit. c x (STOP) Stops playback. d Disc Tray Insert a disc here. e Z (OPEN / CLOSE) Opens or closes the disc tray.
OPERATE Switches DVD Player ON and OFF. OPEN / CLOSE Opens and closes the disc tray. DVD MENU Accesses menu on a DVD disc. TITLE Displays title menu, if available. b B v V (left/right/up/down) • Selects an item in the menu. RETURN Removes the setup menu, displays the video CD with PBC. ENTER • Confirms menu selection. Introduction Remote Control • SCAN ( m / M ) Search backward or forward. DISPLAY Accesses On-Screen display. • PLAY ( H ) Starts playback.
Installation and Setup Setting up the Player The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. If this occurs, position the player away from the TV, VCR, or radio, or turn off the unit after removing the disc. DVD Player Connections Depending on your TV and other equipment there are various ways you can connect the player. Please refer to the manuals of your TV, stereo system or other devices as necessary for additional connection information.
Connect the DVD player to your optional equipment for audio output. Rear of DVD player Amplifier equipped with 2-channel digital stereo (PCM) or audio / video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS): Connect one of the DVD Player’s DIGITAL AUDIO OUT jacks (COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (COAXIAL X) audio cable. Digital Multi-channel sound A digital multi-channel connection provides the best sound quality.
Displaying Disc Information on-screen LANGUAGE LANGUAGE Menu Language English Some items can be changed using the menu. Disc Audio Original Disc Subtitle Off 1. Press DISPLAY during playback. Disc Menu Original 2. Press b / B to select an item. The selected item is highlighted. 3. Press v / V to change the setting. Press ENTER. You can also use the number buttons if appropriate (e.g. inputting the title number).
AUDIO Progressive Scan Video provides the highest quality pictures with less flickering. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. Press ENTER to confirm your selection. The confirm menu will appear. Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use.
buttons then press ENTER. Enter the 4-digit password again to verify when the “Confirm Password” section is highlighted, then. The “OK” will be highlighted. LOCK (Parental Control) LOCK Rating Unlock Password NEW Area code P L Move Select Exit Rating Blocks playback of rated DVDs based on their content. Not all discs are rated. 4. Press SETUP to exit the menu. 1. Select Rating on the LOCK menu then press B. If you forget your Security Code 2.
OTHERS PBC On Auto Play On B.L.E. Off Move Select Introduction OTHERS Exit PBC Set Playback Control (PBC) to On or Off. Installation and Setup On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played the same way as Audio CDs. Auto Play You can set up the DVD player so a DVD disc automatically starts playing whenever the DVD is inserted.
Operations General features Buttons Operations Z (OPEN / CLOSE) Opens or closes the disc tray. ALL X (PAUSE) During playback, press X to pause playback. ALL Press X repeatedly to play Frame-by-Frame. DVD During playback, press SKIP (. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. ALL SKIP (. / >) Discs VCD Press SKIP . twice briefly to step back to the previous chapter/track.
Notes on general features: Last Scene Memory • On a Video CD with PBC, you must set PBC to Off on the setup menu to use the repeat function (See “PBC” on page 13). This player memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the player. If you load a disc that has the scene memorized, the scene is automatically recalled.
Playing an Audio CD or MP3/WMA file Audio CD – Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press PLAY or ENTER to playback starts. 001 / 022 CD Normal 00:00 /00:00 TRACK 01 TRACK 02 TRACK 03 TRACK 04 TRACK 05 TRACK 06 DISPLAY Program List PROGRAM Add MP3 / WMA 1. Press v / V to select a folder, and press PLAY or ENTER to see the folder contents. 2. Press v / V to select a track then press PLAY or ENTER. Playback starts.
Programmed Playback The program function enables you to store your favorite tracks from any disc in the player memory. A program can contain 30 tracks (Audio CD, MP3/WMA). 1. Insert a disc. (Audio CD, MP3 or WMA.) 2. Press v / V to select the desired file. 3. Press PROGRAM during playback or in the stop mode. Repeat press PROGRAM to place additional tracks on the program list. 4. Press DISPLAY. Program List menu appear. Press v / V to select the track you want to start playing.
Viewing a JPEG file Still Picture Using this DVD Player you can view discs with JPEG files. 1. Press PAUSE/STEP during slide show. The player will now go into PAUSE mode. 1. Insert a disc and close the tray. The PHOTO menu appears on the TV screen. 2. To return to the slide show, press PLAY, ENTER or press PAUSE/STEP again. Zoom 001 / 052 00:00 /00:00 Normal 1. Press ZOOM during playback to activate the Zoom function. File 01 File 02 File 03 File 04 File 05 DISPLAY Program List PROGRAM Add 2.
Reference Language Codes Language Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Javanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code 7074 7073 7082 7089 7176 7565 6869 6976 7576 7178 7185 7265 7387 7273 7285 7383 7378 7365 7165 7384 7465 7487 7578 7583 7575 7589 7579 7585 7679 7665 7686 Language Lingala Lithuanian Macedonian Malagasy Malay M
Troubleshooting Symptom Possible Cause • The power cord is disconnected. • Plug the power cord into the wall outlet securely. The power is on, but the DVD player does not work. • No disc is inserted. • Insert a disc. (Check the disc indicator in the display window is lit.) No picture. • The TV is not set to receive DVD signal output. • Select the appropriate video input mode on the TV. • The video cable is not connected securely. • Connect the video cable securely.
Specifications General Power requirements: AC 200-240 V , 50/60 Hz Power consumption: 8 W Dimensions (Approx.): 360 x 35 x 242 mm (14.2 x 1.4 x 9.5 inches) (W x H x D) without foot Weight (Approx.): 1.7 kg (3.7 lbs) Operating temperature: 5 °C to 35 °C (41 °F to 95 °F) AUDIO OUT: 2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1 DIGITAL OUT (COAXIAL): 0.
NEC Australia Pty. Ltd.
P/NO.
