NEC SIP Conference Max Conferencing Phone USER’S GUIDE NDA-31109 Issue 2.
NEC SIP CONFERENCE MAX USER’S GUIDE UNPACKING AND SETTING UP YOUR SIP CONFERENCE MAX PHONE For information on unpacking and setting up your SIP Conference Max phone, please refer to the SIP Conference Max Administrator’s Guide. KEYPAD FUNCTIONS Function Key ON / OFF PHONEBOOK EDIT REDIAL PROG. CONFERENCE Press to dial the pre-programmed number for your internal conferencing bridge.
LCD DISPLAY F I GUR E 2 SIP Conference Max LCD display USING THE SIP CONFERENCE MAX PHONE The following paragraphs describe how to use your SIP Conference Max phone. TO MAKE A CALL 1. Press the ON/OFF key to activate the phone. You hear a dial tone. (The phone icon and line states appear when the phone is active (see figure 3).) FI GU RE 3 SIP Conference Max phone icon 2. Dial the number as you would on a standard phone. The number appears on the LCD screen.
TO MUTE DURING RINGING 1. Press the star (*) or the MUTE key to mute the ringer for the duration of the ringing. > Note: This only mutes the current ring; the ringer is unmuted for subsequent calls. TO ADJUST RINGER VOLUME 1. While the phone is ringing, press VOLUME UP or VOLUME DOWN. 2. While the phone is inactive, press VOLUME UP or VOLUME DOWN. The ringer melody plays once at the new level. TO ADJUST LOUDSPEAKER VOLUME 1. Press the VOLUME UP key while on a call to increase volume. 2.
>TONES AND ALERTS Tone/Alert Description Confirmation A tone will play upon successful programming entry.
