Electronics America Switch Reference Guide
Table Of Contents
- SmartPanel
- Browser-based interface
- Command Line Interface
- Introduction
- Information Menu
- Introduction
- Menu overview
- System Information Menu
- SNMPv3 Information Menu
- System information
- Show last 100 syslog messages
- System user information
- Layer 2 information
- FDB information menu
- Trunk group information
- Layer 3 information
- ARP information
- IP information
- IGMP multicast group information
- IGMP multicast router port information
- Link status information
- Port information
- Group information
- Information dump
- Statistics Menu
- Configuration Menu
- Introduction
- System configuration
- System host log configuration
- Secure Shell Server configuration
- RADIUS server configuration
- TACACS+ server configuration
- NTP server configuration
- System SNMP configuration
- SNMPv3 configuration
- SNMPv3 User Security Model configuration
- SNMPv3 View configuration
- SNMPv3 View-based Access Control Model configuration
- SNMPv3 Group configuration
- SNMPv3 Community Table configuration
- SNMPv3 Target Address Table configuration
- SNMPv3 Target Parameters Table configuration
- SNMPv3 Notify Table configuration
- System Access configuration
- Port configuration
- Spare Ports Group configuration
- Group configuration
- Configuration Dump
- Saving the active switch configuration
- Restoring the active switch configuration
- Operations Menu
- Boot Options Menu
- Maintenance Menu
Command Line Interface 52
Layer 3 statistics Menu
Command: /stats/l3
[Layer 3 Statistics Menu]
ip - Show IP stats
route - Show route stats
arp - Show ARP stats
icmp - Show ICMP stats
tcp - Show TCP stats
udp - Show UDP stats
igmp - Show IGMP stats
clrigmp - Clear IGMP stats
ipclear - Clear IP stats
dump - Dump layer 3 stats
The following table describes the Layer 3 statistics menu options. Layer 3 functionality is limited in this release.
Table 43 Layer 3 statistics menu options
Command Usage
ip Displays IP statistics
route Displays route statistics
arp <clear> Displays Address Resolution Protocol (ARP) statistics. Add the
argument, clear, to clear ARP statistics.
icmp Displays ICMP statistics.
tcp Displays Transmission Control Protocol (TCP) statistics. Add the
argument, clear, to clear TCP statistics.
udp Displays User Datagram Protocol (UDP) statistics. Add the
argument, clear, to clear UDP statistics.
igmp Displays IGMP statistics.
clrigmp <1-4095>|all Clears all IGMP statistics for the selected VLANs.
ipclear Clears IP statistics. Use this command with caution as it will
delete all the IP statistics.
dump Displays all Layer 3 statistics.
IP statistics
Command: /stats/l3/ip
IP statistics:
ipInReceives: 36475 ipInHdrErrors: 0
ipInAddrErrors: 905
ipInUnknownProtos: 0 ipInDiscards: 0
ipInDelivers: 4103 ipOutRequests: 30974
ipOutDiscards: 0
ipDefaultTTL: 255
The following table describes the IP statistics:
Table 44 IP statistics
Statistics Description
ipInReceives The total number of input datagrams received from interfaces, including those
received in error.
ipInHdrErrors The number of input datagrams discarded due to errors in their IP headers, including
bad checksums, version number mismatch, other format errors, time-to-live exceeded,
errors discovered in processing their IP options, and so on.
ipInAddrErrors The number of input datagrams discarded because the IP address in their IP header
destination field was not a valid address to be received at this switch. This count
includes invalid addresses (for example, 0.0.0.0) and addresses of unsupported
classes (for example, Class E).
For entities which are not IP gateways and therefore do not forward datagrams, this
counter includes datagrams discarded because the destination address was not a
local address.
ipInUnknownProtos The number of locally addressed datagrams received successfully but discarded
because of an unknown or unsupported protocol.