Electronics America MultiSync User's Manual

English-11
English
5. Switch on the power of all the attached
external equipment
When connected with a computer, switch on the power of
the computer first.
6. Operate the attached external
equipment
Display the signal from the desired input source.
7. Adjust the sound
Make volume adjustments when required.
8. Adjust the screen (See page 18)
Make adjustments of the screen display position when
necessary.
9. Adjust the image (See page 18)
Make adjustments such as brightness or contrast when
required.
10. Recommended Adjustments
To reduce the risk of the “Image Persistence”, please adjust
the following item based on the application being used:
“SCREEN SAVER” (See page 19). It is recommended that
the “FAN CONTROL” setting (See page 20) be turned to ON
also.