User's Manual

Monitor
Specifications
MultiSync FP1350
Monitor
Notes
Picture Tube Diagonal:
Viewable ImageSize:
Radius:
55.3 cm (22 inch)
50.8 cm (20 inch)
57800mm
90° deflection, 0.25-0.27 mm (variable) grille pitch,
medium short persistence phosphor, aperture grille
CRT, multi-layered, anti-static screencoating,
semi-dark tint screen, and OptiClear screensurface.
Input Signal Video:
Sync:
ANALOG 0.7 Vp-p/75 Ω
Separate sync. TTL Level
Horizontalsync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative)(TTL Level)
Sync on Green video (Positive)0.7Vp-p and sync.
(Negative) 0.3 Vp-p
Display Colors Analog input: Unlimited number ofColors Depends onthe display card
Synchronization
Range
Horizontal:
Vertical:
31 kHz to 115 kHz
55 Hz to 160 Hz
Automatically
Automatically
Resolutions Supported
Resolutionbased on horizontal andvertical
frequencies only
640 x 480@ 60 to 160 Hz
800 x 600@ 55 to 160 Hz
832 x 624@ 55 to 160 Hz
1024 x 768 @ 55 to 143 Hz
1152 x 870 @ 55 to 125 Hz
1280 x 1024 @ 55 to 107Hz
1600 x 1200 @ 55to92Hz..................
1792 x 1344 @ 55 to 81 Hz
1800 x 1440 @ 55 to 76 Hz
1856 x 1392 @ 55 to 78 Hz
1920 x 1440 @ 55 to 76 Hz
Some systems may not support all modeslisted
NEC cites recommended resolution at85 Hz for
optimal display performance.
Active DisplayArea
(Factory setting)
Horizontal:
Vertical:
396 mm
297 mm
Dependent upon signal timing used, and does not
include borderarea.
Active DisplayArea
(Full scan)
406 mm
305 mm
Dependent upon signal timing used, and does not
include borderarea.
Power Supply AC 100-120 V / 220-240V, 50/60Hz
Current Rating 2.3 A @ 100-120V / 1.0A @ 220-240 V
Dimensions 483 (W)x 501 (H)x 472 (D) mm
Weight 34.0 kg
Enviromental Considerations
Operating Temperature:
Humidity:
Altitude:
Storrage Temperature:
Humidity:
Altitude:
+10° C to +35° C
30% to 80%
0 to 3000m
-20° C to +60° C
10% to 90%
0 to 13700m
NOTE: Technical specifications are subject to change without notice.
E - 14