Monitor User's Manual

Specifications
Monitor
Specifications
MultiSync FE700
Monitor
Notes
Picture Tube Diagonal:
Viewable Image Size:
Radius:
43 cm (17 inch)
41 cm (16 inch)
50.000 mm
90° deflection, 0,25 mm grille pitch, medium short
persistence phosphor, aperture grille CRT,
multi-layered, anti-staticscreen coating, dark-tint
screen and OptiClear screen.
Input Signal Video:
Sync:
ANALOG 0,7 Vp-p/75 Ω
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Display Colors Analog input: Unlimited number of Colors Depends on the display card
Synchronization
Range
Horizontal:
Vertical:
31 kHz to 70 kHz
55 Hz to 120 Hz
Automatically
Automatically
Resolutions Supported
Resolution based on horizontal and vertical
frequencies only
640 x 480 @ 60 to 120 Hz
800 x 600 @ 55 to 110 Hz
832 x 624 @ 55 to 105 Hz
1024 x 768 @ 55to87Hz...................
1152 x 870 @ 55 to 77 Hz
1280 x 1024 @ 55 to 66 Hz
Some systems may not support all modes listed
NEC cites recommended resolution at 85 Hz for
optimal display performance.
Active Display Area
(Factory setting)
Horizontal:
Vertical:
315 mm
236 mm
Dependent upon signal timing used, and does not
include border area.
Active Display Area
(Full scan)
325 mm
243 mm
Dependent upon signal timing used, and does not
include border area.
Power Supply AC 100-120 V / 220-240 V, 50/60 Hz
Current Rating 1,8 A @ 100-120 V / 1,0 A @ 220-240 V
Dimensions 403 (W) x 427 (H) x 424 (D) mm
Weight 19,0 kg
Enviromental Considerations
Operating Temperature:
Humidity:
Altitude:
Storrage Temperature:
Humidity:
Altitude:
+10° C to +35° C
30% to 80%
0 to 3.000 m
-20° C to +60° C
10% to 90%
0 to 13.700 m
NOTE: Technical specifications are subject to change without notice.
E - 11
0
5
25
75
95
100