Manualshelf

User's Guide

ManualsBrandsNEC ManualsMonitor SoftwareNEC MultiProfiler
41424344454647484950
42 | NEC MULTIPROFILER - USER’S GUIDE
Chapter
4
Example Usage Scenarios
Color Managed Workow with Print Emulation
In this example, the monitor will be congured for use in a color managed workow that utilizes the full color gamut of
the monitor, and a print emulation for US Web Coated SWOP printing will also be congured.
Since in this example the monitor will be used in a color-managed workow (meaning all of the applications being used
are color managed), the monitor will be set up to use its full (native) color gamut. This will provide the maximum possible
color gamut and not be articially limited by using a set colorspace such as AdobeRGB or sRGB. The color management
within the applications being used will automatically convert colors as necessary by using the ICC/ColorSync prole
created by MultiProler.
Note: If the color workow is not color managed, then for some applications, it may be benecial to use a set colorspace such as
sRGB.
Two picture modes will be created, one for normal viewing, and one for the print emulation preview. The two modes can
be toggled using MultiProler or using the monitor’s OSD controls.
Notes:
1. Since both of the modes being created are based on using the same full color gamut of the display, it is acceptable
to switch between picture modes using the OSD controls on the monitor, because the ICC/ColorSync prole is the same
between the two modes.
2. Proles will only be automatically updated when using MultiProler. Proles cannot be changed using the OSD controls.
On the Picture Mode panel, select the Picture Mode
that will be used to store the full color gamut settings.
The choice of which of the 5 Picture Modes is a personal
preference since they can all be congured in the same
way.
In this example, the rst Picture Mode is selected. The
settings for this mode will be replaced by the edits made
next.
The Metamerism correction setting can be turned off
if the monitor is not being used with a second standard
color gamut monitor.
Click Edit... to start the Color Conguration Wizard.