User's Guide
41 | NEC MULTIPROFILER - USER’S GUIDE
Using the Adobe Color Management Module (CMM)
It is highly recommended to use the Adobe CMM with MultiProler if you are using Adobe ap-
plications because it will mean that the color management system is used to create the 3D LUT
for the print emulation, will be the same as that used within the application to actually generate
the prints.
The Use Adobe CMM selection will be disabled if the Adobe CMM is not installed on the system.
Note that even though an Adobe application is installed on your system, the separate Adobe
CMM must also be installed because 3rd party applications such as MultiProler cannot use the
standard Adobe CMM. The Adobe CMM is available for download for Mac OS and Windows from
Adobe at:
http://www.adobe.com/downloads/
3D LUT sub-window
The 3D LUT sub-window can be shown during the Print Emulation conguration by selecting View 3D LUT. This window
shows a three-dimensional representation of the Look Up Tables that are created based on the current printer prole
and settings such as rendering intent. The points on the plot show how individual colors are transformed from the RGB
colorspace of the monitor, so they represent that of the printer colorspace.
This feature is useful to help visualize the impact of each of the settings and how the printer gamut relates to that of the
monitor.
The 3D plot can be rotated in multiple directions by clicking and dragging. To stop the rotation click the plot twice.