User's Guide
37 | NEC MULTIPROFILER - USER’S GUIDE
Name Preset
The Name Preset page is shown if a Custom Picture Mode is selected on the rst wizard page, and is used to select
which of the 5 available memory locations to use to store the custom mode settings, and to enter a custom name for
the mode.
There are 5 available memory locations which can be selected in this page. Note that the current settings in the selected
memory location will be overwritten at the next stage, so choose a memory location containing a Custom Picture Mode
setting that you do not currently need.
The Custom Picture mode will be created in whichever of the 5 Picture Modes that was selected when the wizard was
started.
About Custom Picture Modes
There are 5 available Picture Modes that can be selected from the Picture Mode page in MultiPro-
ler. Each of these Picture Modes can be customized to either be a preset (such as sRGB, or Ado-
beRGB), or as a Custom mode.
There are 5 memory locations in which to store Custom modes. Each of the 5 Picture Modes can be
used as unique Custom modes.
It is also possible to have more than one Picture Mode using the same Custom mode, for example,
with dierent brightness settings.