User's Guide

35 | NEC MULTIPROFILER - USER’S GUIDE
Brightness and Black Level adjustment wizard page
The Brightness and Black Level page is available with all preset and Custom Picture Modes.
The Brightness slider and spinbox
controls adjust the monitor brightness.
The brightness is indicated in Candelas
per square meter (cd/m²) on display
models that have an internal luminance
sensor and represents an absolute
value.
Note: The MultiSync PA231W, P232W,
P242W, and X841UHD models do not
have an internal luminance sensor, and
therefore the Brightness and Black Level
controls are shown as percentages instead
of absolute luminance values.
The SpectraView Engine automatically
calculates and compensates the
brightness value as color settings such
as white point are changed.
The Black Level slider and spinbox
controls adjust the luminance of black
on the screen and are set as an
absolute value in Candelas per square
meter (cd/m²).
Selecting Ambient Light Compensation will enable the light sensor located on the front of the monitor. The current
measured ambient light level will be factored in to calculate the Black Level of the monitor shown on the control.
See the Brightness and Black Level section for more details of these controls.