User's Guide
27 | NEC MULTIPROFILER - USER’S GUIDE
Exporting and Importing Display Settings
MultiProler can be used to easily duplicate one or more settings in a display and transfer them to
other displays using the Export and Import functions.
First congure the display with the desired settings and Picture Mode congurations.
Next, with the display for which the settings are to be copied from selected, click Export... on the
Status panel. This will open the Export Display Settings dialog.
From the Export Display Settings dialog, select the display and application settings to be read from
the display and saved to the export MultiProler Settings le.
Click Export... to name the MultiProler Settings le and read the selected settings from the display.
Once the MultiProler Settings le has been created it can be transferred to other computers and
then imported into other compatible displays using Import... on the Status panel in MultiProler. The
le is compatible across different platforms and operating system versions.
Notes:
1. The following Picture Modes cannot be imported into the PA231W, P232W, P241W and P242W
display models because they are not supported: AdobeRGB, DCI, and eciRGB v2.
2. Picture Modes that use the 3D LUT of the display (i.e. Print Emulation modes) cannot be transferred
between the PA322UHD and other display models. This is because the size of the 3D LUTs are dierent.