User's Guide

26 | NEC MULTIPROFILER - USER’S GUIDE
Status panel
The Status panel shows various aspects of the current software
and connected monitor.
Software Version shows the version information for the
MultiProler software.
The Check for Software Updates button will directly query
the NEC website to see if a newer version of the software is
available. If a newer version is available, a message will be
shown listing the new version, and a download link will be
provided. This function requires an Internet connection and
many not function if a proxy setting is being used on the system,
or if a rewall or security application blocks network access
from MultiProler.
Display Information
Model Name shows the model name of the currently selected monitor.
Serial Number shows the serial number of the currently selected monitor.
Operating Hours shows the total number of hours that the currently selected monitor has been in use.
Firmware Version shows the internal rmware version of the currently selected monitor.
Display Prole shows the ICC/ColorSync prole that is currently associated with the selected monitor in the
Operating System’s Color Management System.
Display Settings
Re-Synchronize will query the Picture Mode settings on the monitor to make sure that the modes listed in MultiProler
reect those of the monitor. For example, if the monitor was manually adjusted using the On Screen Display controls,
then the monitor settings may become out of sync with those shown in MultiProler. In this case, use this feature to
re-synchronize the MultiProler settings.
Import... opens the le selection dialog for importing a MultiProler Settings le to the currently selected display. See
the following section for more details.
Export... opens the Export Display Settings dialog for selecting the display settings to read from the display and save
to a MultiProler Settings le. See the following section for more details.
Note: Import and Export functions are not available on the X841UHD display model.