User's Guide

17 | NEC MULTIPROFILER - USER’S GUIDE
About Active Picture
Note: Active Picture is available on the PA322UHD and X841UHD models only.
Active Picture selects the picture window to be controlled when either a Picture-By-Picture or
Picture-In-Picture mode is selected.
The controls in the Picture Mode panel, Color Vision panel, and the Multi Picture panel will impact
only the currently selected picture window. When dierent Active Picture windows are selected, a
white rectangle will ash briey, indicating the perimeter of the current window area.
As an example of how this could be used, a 4 Picture-By-Picture mode could be selected, and each
screen window quadrant displays a dierent type of Color Vision emulation for the same video sig-
nal, or even dierent video signal inputs. This would allow simultaneous checking of dierent types
of human color vision deciencies.
A selection control for the Active Picture, like the example below, will be shown on the Picture Mode
and Color Vision panels when a Picture-By-Picture or Picture-In-Picture mode is being used.
Note: Picture-In-Picture and Picture-By-Picture modes cannot be used when Source Input is used to combine
multiple inputs. See “Inputs panel” on page 18.