User's Guide

16 | NEC MULTIPROFILER - USER’S GUIDE
Picture Mode selects the Picture Mode to be applied on the PIP window. The red arrow in the list indicates the
current Picture Mode used on the main screen. This function makes it possible to view the PIP or PBP window in a
different colorspace.
Horizontal and Vertical Position - these controls adjust the location of the PIP window on the main screen.
Color Vision Emulation - this control selects the type of color vision deciency emulation that is applied to the PIP
window. Using this function in a PIP or PBP allows simultaneous viewing of the normal and the color vision deciency
emulation versions of the same image. See the following section for a more detailed description of this function.
Notes:
1. MultiProler sets the ICC/ColorSync prole for the main screen and not the PIP window. Therefore some color-managed
applications may not display as expected in the PIP window because the ICC/ColorSync prole for the main screen is being
used.
2. Dual 3D LUT limitation - The SpectraView Engine used in all supported display models except the PA322UHD and
X841UHD is limited to using one set of 3D LUTs at a time. This means that the PIP feature cannot be used to correctly show a
Picture Mode that uses a 3D LUT at the same time that a 3D LUT Picture Mode is used on the main screen. 3D LUTs are only
used for the Custom Picture Modes created for Print Emulation.
For the PA322UHD and X841UHD models:
The operation of Multi Picture is different from other models. The main screen area, Picture-By-Picture windows, and
Picture-In-Picture windows can be controlled separately via the use of Active Picture. See “About Active Picture”
on page 17 for more information.
The controls shown will depend on the type of Multi Picture Mode selected, and the capabilities of the display model
being used.